vanepp
September 14, 2022, 4:21pm
2
Your part has a number of problems. Breadboard is schematic view where it would typically be like this:
An adapter board that converts SMD to DIP. It is also not aligned to the 0.1in grid which it should be.
schematic is also not aligned to the 0.1in grid and is missing terminalIds which causes the connection the the middle of the pin rather than the end as is desirable
pcb looks mostly ok (I didn’t verify that the footprint is ok though!)
This tutorial on part making may help you (both apply to current versions of Fritzing)
(Edit: November 2016: This is an updated (and corrected) version of the original parts creation howto. This version corrects some suggestions (mostly saving Inkscape files as optimized svg which turns out to cause other problems) with the first version and expands the section on parts testing. While there doesn’t appear to be a lot of interest in this subject I’ll make at least this update so the information is as correct as I can get it.)
This is a description of how I made the Valor PM6078-00…
NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-Fritzing Parts Fast
ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-Fritzing Adv Tips & Tricks
A series of part creation videos - I’m not an expert, but there was nothing else around at the time.
Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -.
Recorded slowly for older people, so select a higher speed if it’s too slow.
P.S. - Sorry about the voice/sound
Someone in this forum post
requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are…
schematic Inkscape plugin
Hi all!
I have been working on an extension for Inkscape to create rectangular schematic symbol .svg files for use in Fritzing. I think I created a useful tool to speed up creation of schematic symbols, and now I want to share it with the community.
It’s available on github:
https://github.com/revolt-randy/Fritzing-Schematic-an-Inkscape-Extension.
To install:
In Inkscape, the edit menu → user preferences → system will have an option for ‘User extensions’ - allowing you to open the folder to…
If you use Inkscape the schematic extension makes schematic creation easy.
Peter
via google translate:
Su parte tiene una serie de problemas. Breadboard es una vista esquemática donde normalmente sería así:
Una placa adaptadora que convierte SMD a DIP. Tampoco está alineado con la cuadrícula de 0,1 pulgadas que debería estar.
el esquema tampoco está alineado con la cuadrícula de 0,1 pulgadas y le faltan ID de terminal, lo que hace que la conexión se realice en el medio del pin en lugar del final, como es deseable
pcb se ve mayormente bien (¡aunque no verifiqué que la huella esté bien!)
Este tutorial sobre la creación de piezas puede ayudarlo (ambos se aplican a las versiones actuales de Fritzing)
(Edit: November 2016: This is an updated (and corrected) version of the original parts creation howto. This version corrects some suggestions (mostly saving Inkscape files as optimized svg which turns out to cause other problems) with the first version and expands the section on parts testing. While there doesn’t appear to be a lot of interest in this subject I’ll make at least this update so the information is as correct as I can get it.)
This is a description of how I made the Valor PM6078-00…
NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-Fritzing Parts Fast
ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-Fritzing Adv Tips & Tricks
A series of part creation videos - I’m not an expert, but there was nothing else around at the time.
Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -.
Recorded slowly for older people, so select a higher speed if it’s too slow.
P.S. - Sorry about the voice/sound
Someone in this forum post
requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are…
Complemento esquemático de Inkscape
Hi all!
I have been working on an extension for Inkscape to create rectangular schematic symbol .svg files for use in Fritzing. I think I created a useful tool to speed up creation of schematic symbols, and now I want to share it with the community.
It’s available on github:
https://github.com/revolt-randy/Fritzing-Schematic-an-Inkscape-Extension.
To install:
In Inkscape, the edit menu → user preferences → system will have an option for ‘User extensions’ - allowing you to open the folder to…
Si usa Inkscape, la extensión esquemática facilita la creación de esquemas.
