Share your custom made parts here


#1

EDIT: For a better overview, there is now a new parts submit forum category.
Please add your new parts there, one per topic, and use the part name as the title.


This forum topic serves as a place to share everyone’s self-made fritzing parts. Simply add a comment and attach your .fzpz file.
Please include the following information:

  • name and manufacturer of the part
  • which views you created (breadboard / schematic / pcb)
  • which views you tested (breadboard / schematic / pcb)

Optionally, also add an image of the real part and/or its fritzing views.

Thanks!


Advanced users are also invited to create a pull-request at the fritzing-parts repository on github!


Raspberry Pi 3 Fritzing Part
#2

Why is there no online part library?
#3

MOLEX - Picoblade Headers

Molex Picoblade Header: 1.25mm Pitch Miniature Crimping Connector. Single Row Straight Pin, Vertical and Horazonal (SMT)

  • Views Created: breadboard, schematic, pcb
  • Views Tested: breadboard, schematic, pcb

Molex Picoblade Bin - All 14 Headers: Molex-Picoblade.fzbz (98.0 KB)

Molex_Picoblade_53398-0271_2pin-smd-Vert.fzpz (6.1 KB)
Molex_Picoblade_53398-0371_3pin-smd-Vert.fzpz (6.4 KB)
Molex_Picoblade_53398-0471_4pin-smd-Vert.fzpz (6.8 KB)
Molex_Picoblade_53398-0571_5pin-smd-Vert.fzpz (7.1 KB)
Molex_Picoblade_53398-0671_6pin-smd-Vert.fzpz (7.3 KB)
Molex_Picoblade_53398-0771_7pin-smd-Vert.fzpz (7.5 KB)
Molex_Picoblade_53398-0871_8pin-smd-Vert.fzpz (7.8 KB)
Molex_Picoblade_53261-0219_2pin-smd-Horz.fzpz (6.0 KB)
Molex_Picoblade_53261-0319_3pin-smd-Horz.fzpz (6.3 KB)
Molex_Picoblade_53261-0419_4pin-smd-Horz.fzpz (6.7 KB)
Molex_Picoblade_53261-0519_5pin-smd-Horz.fzpz (7.0 KB)
Molex_Picoblade_53261-0619_6pin-smd-Horz.fzpz (7.3 KB)
Molex_Picoblade_53261-0719_7pin-smd-Horz.fzpz (7.4 KB)
Molex_Picoblade_53261-0819_8pin-smd-Horz.fzpz (7.7 KB)


HIROSE - DF13 Series Headers

Hirose DF13 Series Header: 1.25mm Pitch Miniature Crimping Connector. Single Row Straight Pin, Vertical and Horazonal (SMT)

Hirose DF13 Series Bin - All 14 Headers: Hirose DF13 Series.fzbz (94.2 KB)

Hirose_DF13-2p-125v_2pin-smd-Vert.fzpz (6.0 KB)
Hirose_DF13-3p-125v_3pin-smd-Vert.fzpz (6.2 KB)
Hirose_DF13-4p-125v_4pin-smd-Vert.fzpz (6.5 KB)
Hirose_DF13-5p-125v_5pin-smd-Vert.fzpz (6.8 KB)
Hirose_DF13-6p-125v_6pin-smd-Vert.fzpz (7.0 KB)
Hirose_DF13-7p-125v_7pin-smd-Vert.fzpz (7.2 KB)
Hirose_DF13-8p-125v_8pin-smd-Vert.fzpz (7.6 KB)
Hirose_DF13-2p-125h_2pin-smd-Horz.fzpz (5.8 KB)
Hirose_DF13-3p-125h_3pin-smd-Horz.fzpz (6.0 KB)
Hirose_DF13-4p-125h_4pin-smd-Horz.fzpz (6.3 KB)
Hirose_DF13-5p-125h_5pin-smd-Horz.fzpz (6.5 KB)
Hirose_DF13-6p-125h_6pin-smd-Horz.fzpz (6.8 KB)
Hirose_DF13-7p-125h_7pin-smd-Horz.fzpz (6.9 KB)
Hirose_DF13-8p-125h_8pin-smd-Horz.fzpz (7.3 KB)


#4

Can I also use this to request for some parts from other users who know how to create them?
I would like to request the LM1875T staggered legs, capacitors with the legs separated at 400 mil, LM3886.


LM2596 created. How to add it to main repository?
#5

@exztinct01
I would suggest making your own post in the parts section of the forum. That way this thread can be specifically devoted to already made parts by the fritzing community. Thanks you for your understanding. Also, please provide any and all links to documentation of your said part. This helps folks should they be able help, to easily access the said information (ie: part dimensions) that they need to make parts…

This is a current example of what I am talking about
http://forum.fritzing.org/t/need-help-on-creating-a-custom-part-12v-relay-trkm-tianbo/?source_topic_id=791

Good luck!


#6

Full part file with all views that work fine with my limited testing - I don’t have enough experience to fully test -.

Rotary Switch 12 position 1 pole - one was already made but it wasn’t very neat so I made a better one -


---------------------------------------------------------------------------------------------------------------------------------------------------------

174917_DENSO-ECU-socket_48pin-040-070 - Mazda Miata MX5 old 48pin ECU socket -
http://www.mediafire.com/download/yblhv87og8dvh23/174917_DENSO-ECU-socket_48pin-040-070.fzpz
DON’T USE THIS PART FOR PRODUCTION AS THERE ARE SOME SLIGHT ERRORS - 22 May 16
UPDATED PART LINK

MPX4250AP Pressure Sensor
http://www.mediafire.com/download/am9fev9cgzma9d0/MPX4250AP+pressure+sensor.fzpz
DON’T USE THIS PART FOR PRODUCTION AS THERE ARE SOME SLIGHT ERRORS - 22 May 16
UPDATED PART LINK

Bourns #3296 Square Trimpot 25 turn - 90º sharp bent legs with body lying flat for low profile
http://www.mediafire.com/download/2v6n31d9lfgqty8/Bourns_3296_Square_Trimpot_25_turn-flat.fzpz
DON’T USE THIS PART FOR PRODUCTION AS THERE ARE SOME SLIGHT ERRORS - 22 May 16
UPDATED PART LINK


#7

hello, i will add both libraries to the fritzing core parts!


@steelgoose: this is perfect work! thank you very much!

because we want to keep the core-parts clean, i have to obsolete these parts and
exchanged them with a copy of themselves but with a cleaned module-id! swap them with the obsolete
mechanism should keep all connections.


#8

Thanks fa1, I am working on several other connector series, I think I have it down to a science. Too may projects… Hopefully I will get more done before the next core update is published.


#9

the good thing: with our new fritzing release, the parts will get updated separately to the fritzing app. that means all parts pushed to the fritzing-parts-master will automatically delivered to all fritzing users!!! same with “bin”-updates!


#10

You read my mind, now I don’t have to request it… I about got the four Grove connectors done, not sure what I will work on next… Any request? My templates work best with wafer type connectors…


#11

i still don’t understand how to share my work (fzpz file) with the community!!! only through clone on github and then “pull request” ?! i try to post and use “Upload” but as i’m a new user it’s prohibited…


#12

What about creating a Project?

In a few days this should work (i think this is a spam, phishing protection from wordpress, someone is looking into this, but apparently it hasn’t been changed, so it might be a good reason.)


#13

Finally found the setting to allow new users to upload files. Please try again! :slight_smile:


#14

Ok, for a better overview I have now separated the “parts” category into “parts help” and “parts submit”.
Instead of commenting on this post, please create a new topic in the “parts submit” category.

Thanks for the suggestion to @uaneme!


#15

#16

My first attempt at making parts. Hope you can use them, as it took me a long time…

Panasonic_Choke_inductor_ELC09D8R7. .fzpz (8.0 KB)


#17

Another. Traco TSR-1 DC/DC
(as a new user, I can only upload one at a time)

TSR_1-2450-DC-DC.fzpz (10.0 KB)


#18

and yet Upright_Rectifier_ Diode.fzpz (6.6 KB)
another…


How do you get a standard resistor to draw as vertical on a breadboard?
#20

I don’t know much about this part as I didn’t make it, but this is the same Songle Relay as someone else made but with the dimension errors corrected.

Corrections
PCB view - pin position errors corrected so it now matches the datasheet.


Breadboard - pins moved so that it now mates to the 0.100" spacing of the breadboard on all pins.

songle relay.fzpz (11.0 KB)


#21

Arduino Uno (Rev3)-upsidedown.
This is the same part in the part bin but flipped upside down so you can place it on top of the PCB.
You can manually put the original part on the top of a PCB in Fritzing but all the text is reversed, so I flipped the PCB UNO svg and flipped back all the text.

Arduino Uno (Rev3)-upsidedown.fzpz (49.1 KB)

UPDATED PART HERE