MCP4151-103E/P Digital Potentiometer

[D006]

Name of the part
MCP4151-103E/P

Top view

Datasheet
The official documentation of the part manufacture is linked here:
(https://ww1.microchip.com/downloads/en/DeviceDoc/22060b.pdf)

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Footprint
PDIP-8

Does anyone have a design done already?

[RAPTOR7762]

It’ll be up in a while

Easy part, as it only needs minute modifications

[RAPTOR7762]

MCP4151_PDIP.fzpz (6.0 KB)

This should be the part you want

[D006]

Thank you RAPTOR7762, love your work

[RAPTOR7762]

No problem. If you’re interested in making Fritzing Parts, do look at the part creation tutorials.

Part creation howto part 1 breadboard and pcb

Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are…

We are severely lacking in people capable of making parts

What I did is documented in this tutorial

Part creation howto part13-ICs

This is a continuation of As I lately decided to merge this tutorial with Peter’s part creation series, I left the links behind. Never mind, I’ll just leave them there as a reminder. In this tutorial, you are going to learn how to make Fritzing Parts. You need these apps ready: 1. Fritzing (of course) Download Fritzing here: https://fritzing.org/download/ Alternative payment method (without using PayPal): https://fritzing.org/download?payment_method=alt 2. Inkscape Download Inkscape h…

[D006]

Cheers, I’ve dowloaded it all and I’ll have a crack with my next part and see how I go.

[vanepp]

If you have problems feel free to post (preferably with the problem part’s .fzpz file as an upload), we are always happy to help people make parts.

Peter

[RAPTOR7762]

Yes. Hope you will answer part requests!!