Rasperry Pi and Jetson Nano Parts library

[vanepp]

The PI4 is available here:

Raspberry pi 4 model B

OK, success at last I think. First the scaling issue, I indeed compared the cpu rectangle between Illustrator and Inkscape: Your Illustrator breadboard svg [Capture] My Inkscape copy of the breadboard svg: [Capture1] doing the scale calculation (using the widths in px) 51.920/38.851 = 1.336387737767368 which works out that Illustrator is using 72DPI as the drawing unit. Thus to convert the Illustrator svg in Inkscape, start with the Illustrator svg: [Capture2] and make sure scale str…

and there is reputed to be a jetson nano in this project

FZPZ for Jetson Nano?

I’m getting into the nitty gritty of my first project and decided it’s time to use Fritzing. Does anyone have a Jetson Nano FZPZ…any help would be greatly appreciated

You probably need to load the sketch (the .fzz file) and export the part from the parts bin. If that has problems post and I’ll have a look at it.

Peter