So you probably want a 12V DC relay (assuming the 10V signal is DC) with 230V contacts of a suitable current capacity. Once you have selected a relay, then you need to find or make a Fritzing part for it which has a suitable pcb foot print. Then you need to substitute that part in to your sketch as it probably won’t be the same as the Sparkfun part.
Nothing wrong with that, but it is easy to make a mistake in pcb mode and not see it. If you complete schematic and schematic matches what you expect, it means there is more chance that the circuit is correct.
edit the Songle relay (and Fritzing part) here may do what you need:
Peter