Previous work, similar parts
In case there are similar Fritzing parts, or you already started work, please link it here.
NA Top view
This picture shows the part from above, so that is easy to see were connectors should go, and which diameter they have.
NA?
Foto or vector graphic, no links here please.
Datasheet
The official documentation of the part manufacture is linked here:
Can’t find
Please add a link to PDF of the manufacturers datasheet
Very difficult to locate
Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
[x ] Other (please specifiy) Dual H bridge breakout board 3 control pins
Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.
That is exactly what i needed.(IBT-4.fzpz)
You also provided to me some interesting insight. My extensive Google search did not find this because i did not have fritzing part in the search string. Todays search engines are so badly degraded primarily due to purchased vendor priority that one now has to put more specific search terms into the search and even that doesn’t always override the tracking and directing.
Chat GPT did inform me that this symbol existed on the Fritz Forum, but as a first time user I found the part Find/Submit category quite confusing. I wanted to find a part that existed not start a new topic. There needs to be better separation between searching fora part(often with limited technical data) and submitting a new part.
Further I will review the IBT-4 Motor driver50A part submit if i can find it. What you provided above indicates PWM support which s more than I the nformation I now have…
Thanks for your lightning reply. If iI learn enough I will try to verify and complete a part submittal for this version.
Thanks I had already gone off to use what you provided and didn’t finih the thread. Once get my project running I wiil go back and look at it.
Thanks.
Greg
My apologies for typos and spell. 16 months of weekly chemo therapy has taken a toll.
One good addition would be a section suggesting the first thing to do before posting is to do a google search of the form “fritzing part part_name” to find an already existing part. I don’t imagine anyone will read that any more than the rest of the template but it is worth including.