I want esp 32 T-Display- S3 AMOLED fritzing file

parts help
1

Name of the part
Name : ESP 32 T-Display- S3 AMOLED

Previous work, similar parts
In case there are similar Fritzing parts, or you already started work, please link it here.

Top view
This picture shows the part from above, so that is easy to see were connectors should go, and which diameter they have.

Foto or vector graphic, no links here please.

Datasheet
The official documentation of the part manufacture is linked here:

T-Display-S3-AMOLED
T-Display-S3-AMOLED1200×1200 162 KB

Please add a link to PDF of the manufacturers datasheet
https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/blob/main/datasheet/RM67162%20DataSheet_V0.0.pdf

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

2

OK, I’ve started to make your part. Just finished making breadboard PCBl, and schematic svg. (this is the back of the part I guess)

esp 32 T-Display- S3 AMOLED_bb

esp 32 T-Display- S3 AMOLED_pcb

esp 32 T-Display- S3 AMOLED_sch

3

Correct, this is the back of the part and thus the incorrect view for breadboard which should be the front of the board. As well this part (already done) may serve, so always do a google search of the form “fritzing part ESP 32 T-Display- S3 AMOLED” before making parts to check what is already available. It looks like the new version may be a different size than the original but the pinout may be identical and thus may do without a new part.

Peter