I am looking for a Motor Encoder Board

[Vamonosraza]

Name of the part
Motor Encoder Board

Previous work, similar parts
The board where I can connect two ‘DC Motor with two-phase hall-encoder’ to a waveshare motorHAT.

Top view

Datasheet
The official documentation of the part manufacture is linked here:
I cant find any

Please add a link to PDF of the manufacturers datasheet:

CSC615 Motor Encoder Board v2 Connection Documentation.pdf

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Board(?)

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

[KjellM]

This seems to be an assignment for a class?
https://www.coursehero.com/file/74026452/Assignment-3-StartYourMotors-1pdf/

[Vamonosraza]

Yes, but I don’t have CourseHero and it looks like they are not using that board.
I already finished my assignment but I am supposed to include a hardware diagram and I just cant find one for that board.
I know some people create them themselves. How would I go about doing that in case I have to?
Thank you

[vanepp]

@Vamonosraza

I know some people create them themselves. How would I go about doing that in case I have to?

There isn’t enough information available to make a part and making parts is a difficult process. This tutorial provides instructions on how to do so (although most people read them and give up …)

Part creation howto part 1 breadboard and pcb

Someone in this forum post http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487 requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the origi…

Peter

[microMerlin]

If all you need is the diagram, Fritzing can import an image. That won’t have connections on it for wires, but you can fake that using the standard header pins. For that method, what you need is an SVG image that is the right size (dimensions or scale).

SVG files can have embedded raster images (like jpeg or png), so you do not even need to fully convert to vector. For general use, that results in an SVG that takes up a lot more room on disk than really needed.