Breakout board ESP32

[vanepp]

I am still unclear on what you are looking for. Do you want a breakout board for an ESP32 to buy (in which case you probably want one that already has a Fritzing part) or want to make one from one of the ESP32 modules soldered to a pcb of your design? This post has both, it is a sketch (.fzz file) of a Wroom module (that had problems) which eventually got corrected and apparently made in to a board. If you use this make sure you get the corrected version of the wroom part.

Surface mount ESP32 won't pass DRC

Hello, I have been working on a PCB for a project that revolves around an ESP32-wroom. I have all of the components on the board and have most of the routing working fine according to the DRC. My problem is that every single route to the ESP is found to be overlapped by the ESP itself. All of those routes are on the top of the PCB, as is the ESP. [hotrod-pins-2_pcb-drc] Is there something about working with SMD chips that I am missing?

Peter