UM982 rtk module

parts help
1

Name of the part
UM982 module

Top view
image

Datasheet
The official documentation of the part manufacture is linked here:

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

2

This part should do what you want. Note the mounting holes are not drilled by default in pcb. If you want them you need to drag a hole from core parts->pc->hole in to your sketch, position them over the hole in silk screen then set the appropriate size in Inspector.

gps-WTRTK-982.fzpz (20.1 KB)

Peter

3

Okay, perfect! Thanks