Shift level converter wie kann ich den

[vanepp]

I’m unclear on what part you want to change (there isn’t one listed here) but if you are looking for an 8 bit level translator

TXS0108EPW Logic Level Converter

This 8-bit non-inverting translator uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.2 V and 3.6 V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65 V and 5.5 V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.2 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes. TXS0108.fzpz (8.1 KB)

is one.

74LVC8T245 octal buffer / level translator

The last in a series of chips that are useful for level translation between 1.6V and 5V (and the other way) systems. This one consists of 8 tristate output buffers in a 24 pin SMD (only) package. Unlike the rest in this series (which are all unidirectional) this one is bidirectional and can translate any voltage from 1.8 to 5V to any other voltage in that range. This part is also a bit odd in that because this chip is SMD only (the others are available in DIP) the breadboard here is actually a m…

is another. If you have a part that you want modified, if you provide a pointer to the part I’ll have a look.

Peter