Need MAX78000FTHR Board Model

Name of the part
MAX78000FTHR Board

Previous work, similar parts

Top view
image

Foto or vector graphic, no links here please.

Datasheet
The official documentation of the part manufacture is linked here:
https://www.mouser.in/datasheet/2/609/MAX78000FTHR-3117572.pdf

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

This part should do what you want. As usual if you want mounting holes in pcb you need to drag a hole from core parts/pcb/hole in to the sketch, place it over the hole in silkscreen and set the size appropriately. The jtag connectors and the battery connector do not appear in pcb as they aren’t accessible in pcb.

MAX78000FTHR-Board.fzpz (32.3 KB)

Peter

1 Like