Looking for ESP32-DOIT-DEVKIT-V1-BOARD-PINOUT-36-GPIOS

[alhaddar]

Hi
Please help me get it ESP32-DOIT-DEVKIT-V1-BOARD-PINOUT-36-GPIOS

ESP32-DOIT-DEVKIT-V1-Board-Pinout-36-GPIOs-updated - Electronics-Lab.com

[vanepp]

Try this part.

Doit esp32 devkit v1

OK here is an improved (but likely not a direct replacement) version of your part. Much of the change isn’t visible directly. Breadboard has been fully implemented so it now works correctly (that is probably the most visible change). All the svgs have been rescaled to standard scale, Schematic has been made smaller and to match the bb and pcb views. Pcb has a bunch of unneeded elements removed and the pads with holes set to 0.038in (suitable for .1 headers) and aligned to .1in pitch and 1.0 in w…

Peter

[alhaddar]

thank you for help

but this 30 pins
I need 36 pins

[vanepp]

This part should do what you want. Note it was made from the jpg image and there is a good chance that pcb is not accurate (as it isn’t on 0.1in boundaries which all the rest of these boards are.) so before using it print out the pcb footprint at 1:1 scale and compare it to a real board. I can’t find any web site actually selling these boards though only the pinout list.

ESP32-DOIT-DEVKIT-V1-36pin.fzpz (14.2 KB)

Peter

[alhaddar]

Thank you, my friend, for your help to me and to all forum members

my regards