Name of the part
ESP32 S3 N16R8 WROOM1 SMD 41 pin
Your previous work, similar parts
In case there are similar Fritzing parts, or you already started work, please link it here.
Top view
<This picture shows the part from above, so that is easy to see were connectors should go, and which diameter they have.>
Copy and paste a foto or vector graphic. No links here, otherwise your post might be flagged as spam.
Datasheet
The official documentation of the part manufacture is linked here:
Please add a link to PDF of the manufacturers datasheet. Here, a link is fine.
Footprint
SMD,25.5x18mm
Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)
