Necessity is the mother of invention. I just created the part. This was my first Fritzing part so it may not be perfect but I tried to be as accurate as possible with the dimensions (especially in the PCB view). Still, your mileage may vary.
I’ve buyed a PCB with this part and effectivly the whole are to small.
Vanep give me a new part in the post above and this one seems to be correct. For the moment, i’ve not ordered the new PCB but, when i print the PDF pcb, the holes arent correct !
When you print a pdf of the new part the holes aren’t correct? If so in what way are they incorrect? The new part looks correct to me as a gerber in gerbv. The hole is .035 (which is I believe what you wanted) and the pad spacing seems to match the drawing above i.e. 5.011mm between the narrow pads 15.38mm between the wide pads and 29.3878 mm between the two pad sets taking the x y coords from the drill.txt file and converting from thou to millimeters. I haven’t used the pdf conversion so I don’t know how that works.
This should do what you want. As always before ordering boards print out the pcb footprint at 1:1 and check it against a real part. As well there are two holes shown in the diagram above that are currently only on silkscreen. The picture of the module shows no holes there, but if they are needed you can drag a hole from core parts over the hole in the silkscreen to drill the holes (they won’t be drilled by default!)