Esspressif ESP32-C3-DevKitC-02 v1.1

Name of the part
ESP32-C3-DevKitC-02 v1.1

Previous work, similar parts
Don’t know

Top view

Datasheet
The official documentation of the part manufacture is linked here:
https://docs.espressif.com/projects/esp-idf/en/stable/esp32c3/hw-reference/esp32c3/user-guide-devkitc-02.html
Please add a link to PDF of the manufacturers datasheet

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specify)
Development board

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

A google search of the form “fritzing part ESP32-C3-DevKitC-02” (which is in general a good place to start when looking for parts!) turns up this part which appears at a glance to have the correct pinout.

Peter

Thank you @vanepp ! In fact I did googling without the same results before posting here :disappointed_relieved:

I have noticed lately that google sometimes seems to miss parts that I know exist, I don’t know why and sometimes appears to not return the same results for the same search made later (again don’t know why.) As well there is a ESP32-C3-DevKitM-1 I made for someone a few months ago, but it is a different pin out (which may be why the referenced part was made as the description referred to another part that wasn’t the same pitch.) I have had the most luck with the “fritzing part part-number” type searches though.

Peter

1 Like