P.S. I made a bug report for the KiCad part importer, as it failed to convert a KiCad footprint to a Fritzing SVG. I was trying to use that to make this part…
I was actually looking for the bare module - the one linked in my first post. Thanks for helping though
Do you know if that already exists, or if it doesn’t, can you help me figure out how to create it? I’ve never made a Fritzing part before, but I’m willing to learn
Thanks for the quick reply. The part you sent is very similar, but the ESP32-S2-WROVER has an extra row of pins on the bottom. I’m also not sure the pitch is the same (Each pad is 0.9mm, and they are 1.5mm apart center-to-center). I really appreciate your help!
OK here is a part that should do the job. Note as usual, I don’t have one of these so it is wise to print out the pcb footprint at 1:1 and compare it to a real part before ordering boards. As well the vias for the thermal pad don’t work (at least easily) in Fritzing, so to get the vias after you place the part you need to drag a via from core parts/via over the position marked on silkscreen to get the via (I don’t know if they want a thermal pad on the bottom layer as well, if they do you would need to add that some how as well.)