E07-M1101D Part needed

parts help
1

Name of the part
E07-M1101D

Previous work, similar parts
CC1101

Hello everyone,

I’m currently working on a project using the E07-M1101D-SMA module from Ebyte and would like to integrate it into Fritzing for documentation and PCB design. Unfortunately, I couldn’t find an existing Fritzing part for this module.

Does anyone know if a Fritzing part for the E07-M1101D-SMA exists, or has anyone created one that they would be willing to share? Alternatively, if someone has experience designing Fritzing parts and is interested in helping, I would really appreciate any guidance or assistance!

Here is the module’s official page with all technical details:

:point_right: E07-M1101D-SMA Datasheet and Info

Any help would be greatly appreciated!

Thanks in advance. :blush:

Datasheet
The official documentation of the part manufacture is linked here:

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

2

This part should do what you want. Note the mounting holes are not drilled by default they are only present on silkscreen. If you want mounting holes drilled in your sketch you need to drag core/pcb/hole in to the sketch, place it over the mounting hole in silkscreen and set the size appropriately.

ebyte-E07-M1101D-SMA.fzpz (10.2 KB)

Peter

3

That was quick – I really appreciate your help! :blush: Thanks for taking the time to respond.