(duplicate) Is ther a Fritzing Part for a 16-pin ESP32C3 Super Mini?

GRenken · January 24, 2025, 10:25pm

Name of the part
ESP32C3 Super Mini

Previous work, similar parts
In case there are similar Fritzing parts, or you already started work, please link it here.

Top view
This picture shows the part from above, so that is easy to see were connectors should go, and which diameter they have.

Foto or vector graphic, no links here please.

Datasheet
The official documentation of the part manufacture is linked here:

Please add a link to PDF of the manufacturers datasheet

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
[x ] Other (please specifiy) microprocessor

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

vanepp · January 24, 2025, 10:45pm

A google search of the form “fritzing part ESP32C3 Super Mini” finds a number of hits. If one of those is not what you want then you need to obey the template and provide a web site or data sheet of the exact part you want with physcal dimensions and connector information.

Peter

GRenken · January 25, 2025, 10:00pm

I found the part that I was looking for. Initially I had not looked in as many places as I should have.

The part works. Thank you Peter

tcw82 · July 16, 2025, 1:36pm

Where? I have been searching for some time now. 16 pin ESP32 C3 super mini

vanepp · July 16, 2025, 1:38pm

Did you try the google search posted above?

Peter

tcw82 · July 16, 2025, 1:42pm

oh wait, here you go, 16 pin ESP32 C3 super mini. ESP32 C3 super mini

Jeff_Forssell · December 16, 2025, 2:40pm

I got invalid version when I tried to import. I have a 1.0.6 Fritzing newly downloaded.

I tried looking at another part I hard failed to import. When I clicked on it it opened directly and imported to Core parts and looks good.

So I tried clicking on this one to in the download folder, Looked like it was direct importing but it also protested invalid version

Part ‘Esp32-c3 super mini’ was loaded with warnings:

Invalid Version

Invalid Version
─────────────────────────
The fritzing version ‘1.01’ is invalid.
The part might not work properly.
Location: Line 2, Column 0

vanepp · December 16, 2025, 2:52pm

If you click OK, it will load but as noted may not work correctly as the version number is incorrectly formatted:

show details shows the actual error message

and clicking OK loads it anyway

Peter