Df robot ph sensor

[vanepp]

@KingDarBoja

Done:

PH_meter.fzpz (40.9 KB)

This part just had a missing potenciometer (that can be obtained from my DC-DC converter part) but the other thing, I have no idea what to put there.

That did the job, thanks! I grabbed the bb image of a BNC connector from core parts, rescaled it a bit to match the space (the barrel isn’t long enough but close enough!) removed its connectors and pasted it in to bb giving this:

which with your background makes this about as good as it gets I think. This is the latest version of this part with the above change in it.

PH_meter_1.fzpz (65.6 KB)

@sublimeartistry

I haven’t opened the part but the reason I have had fill not work is because the area is made up of 2 paths. One on the outside of the line and one along the inside of the same line.

In this case the “board” is made up of 4 line paths (in a rectangle) and 4 arcs (the curved corner pieces), I expect @KingDarBoja did something similar to what you suggested to get them in to a single path that described the area so it could be filled. In any case, the final result looks pretty good .

Peter