OK here is a bmp388 part. @AnnePloir you may want to consider this instead of the IC you requested. Note the documentation on the DFR wiki is wrong (the dimension image is an apparent old version of the board) so this part was made from the jpeg image. As a result the pcb footprint may not be accurate. Before ordering boards print the pcb footprint out at 1:1 scale and compare it to a real board. As well the mounting holes as usual are not drilled by default. If you want the mounting holes you need to drag a hole part from core parts pcb in to your sketch, place it over the image in silkscreen and set the size appropriately.
dfr-sen0371.fzpz (8.0 KB)
Peter