Converter NMA0515SC

parts help
1

Name of the part
NMA0515SC

Previous work, similar parts
In case there are similar Fritzing parts, or you already started work, please link it here.

Top view
This picture shows the part from above, so that is easy to see were connectors should go, and which diameter they have.

Foto or vector graphic, no links here please.

Captura de pantalla 2024-05-27 a las 19.39.56

Datasheet
The official documentation of the part manufacture is linked here:

Please add a link to PDF of the manufacturers datasheet

Type
I did not read this
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

2

You would need to specify exactly which one you want. It comes in both dip and sip formats. It would also be useful to provide a link to the datasheet (which is available online as requested.)

Peter

3

Sorry…, I’m a newbie
In SIP format.
The datasheet is attached. I don’t know if I did something wrong, but I see it and I can open it.

Datasheet

Thanks!!!

Luis. :wink:

4

This part should do what you want.

edit: Correct the pin layout in breadboard and pcb

NMA0515SC.fzpz (3.8 KB)

Peter

1 Like
5

Thank you very much Peter!!

I will give it a try…

6

Captura de pantalla 2024-07-26 a las 17.53.03

The pins are on the other side. Is it possible to correct it?

Thanks!

7

Yes, I replaced the original part with a corrected one. As the moduleId is identical you will need to delete the part in your sketch then close Fritzing and restart it (to really delete the part) before you can load the corrected version.

Peter