Cant get my parts to load properly after creating custom images

[vanepp]

There isn’t really anything that I see that is that close, here are a couple of choices that may help:

relays:

I want to include some latching DTDP relays... but oh dear

Try this and see if it does what you want. AZ832P2-2C-5DE_Latching_relay.fzpz (8.4 KB) Of note, the hole sizes in PCB are set to 0.39 as their datasheet suggests as well I put in all the pins so you can use a 16 pin socket if you wish. If you don’t want the extra holes just delete them, as they are set noconn and thus Fritzing won’t notice their absence. All three views are present and appear to work as far as Fritzing is concerned (in the real world who knows yet ). (Edit:) An…

the rt424f05 latching relay is probably your best bet.

power supply

Transformer VB 1,5A 9V

[image] VB 1,5/1/9 Short circuit proof PCB transformer PDF specs VB1,5-1-9.fzpz (7.3 KB) EDIT: PCB sizes were wrong. Fixed. EDIT2: Wrong file.

this is similar but without the screw terminals

For screw terminals search in fritzing parts bin for screw terminals

the camdenboss ctb0158-2 seems close to what you want but you need to know the pin spacing of that ever is on the board you are using. I don’t think any of these are surface mount though.

Peter