vanepp
January 25, 2025, 11:23pm
6
This post (which is referred to in one of the other posts) has a one cell version of the 18650 battery shield (as well as 2cell and 4 cell versions.)
OK here is the battery shield. Note the dimensions were taken from a jpg image so are likely not all that accurate (mostly important in pcb!) If you have a board, print out the pcb footprint at 1:1 scale and compare it to the board (and provide corrections if it is wrong!) As well the mounting holes are by default not drilled in pcb, if you want mounting holes you need to drag a hole (from core partsépcb) in to the sketch and place it over the circle in silkscreen and set the appropriate size.
4…
Peter
via google translate
Dieser Beitrag (auf den in einem der anderen Beiträge verwiesen wird) enthält eine Einzellenversion des 18650-Batterieschutzes (sowie 2-Zellen- und 4-Zellen-Versionen.)
OK here is the battery shield. Note the dimensions were taken from a jpg image so are likely not all that accurate (mostly important in pcb!) If you have a board, print out the pcb footprint at 1:1 scale and compare it to the board (and provide corrections if it is wrong!) As well the mounting holes are by default not drilled in pcb, if you want mounting holes you need to drag a hole (from core partsépcb) in to the sketch and place it over the circle in silkscreen and set the appropriate size.
4…
Peter