28BYJ-48 Stepper Motor and ULN2003 Driver Module

roboteach · May 23, 2021, 9:40am

Linking this behaviour…

to a relevant github issue here:

github.com/fritzing/fritzing-app

A part with female connectors do not connect to a part with male connectors when moving it.

opened 10:03PM - 04 Dec 20 UTC

failiz

bug

A part with female connectors do not connect to a part with male connectors when… moving it. Version 0.9.5 in development Windows 10 **Steps to reproduce:** - Go to breadboard view - Add a resistor outside the breadboard - Move the breadboard and place it under the resistor, so the resistor´s connectors are touching the breadboard´s holes The resistor is not connected to the breadboard. ![Untitled Sketch_bb](https://user-images.githubusercontent.com/5708642/101219389-63083f80-3684-11eb-8d1d-7970e4adad7c.png) ## Expected Behaviour The resistor should be connected to the breadboard. ## Context This came up as I was trying to make a part (a probe for a multimeter) that could be attached to male and female connectors. As there are only male or female types, I made a part with a male and a female connector at the same place which internally connected through a bus. Then I realized that this only works when the part with the male connector is moved to the part with the female connector.

Regards!