1.54 inch 128x128 oled I2C display

[vanepp]

Either this one I made for someone a few days ago

4.0inch Capacitive SPI Module ST7796

This part should do what you want. Of note is the mounting holes in pcb are not drilled by default. If you want the mounting holes drilled you need to drag a hole from core parts/pcb in to the sketch and align it on every mounting hole you want drilled (they are marked on silkscreen) and set the appropriate hole size. 4in-spi-lcd-display.fzpz (5.3 KB) Peter

or one of these generic pairs should do you (note you need to select the correct pin order on the generic parts)

OLED 128x64 I2C Monochrome Display SSD1306 created

In such a case we should make a second part that matches the other common version. Do you have a url to an example of the alternate part? edit: A search of Ebay turns up an even mix of both pin layouts so I have made two new parts, one for each pin out. As you noted it is necessary to make sure you have the correct part for the module you have, because using the other one (and reversing power and ground) will likely burn out your module! Note if you want mounting holes in pcb you need to drag …

or a google search of the form “fritzing part oled display” will find all the options available.

Peter