# Zigbee Ebyte Library

**URL:** <https://forum.fritzing.org/t/zigbee-ebyte-library/20480>\
**Category:** parts help\
**Created:** [September 9, 2023, 6:28pm UTC](https://forum.fritzing.org/t/zigbee-ebyte-library/20480 "2023-09-09T18:28:58Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [September 9, 2023, 6:53pm UTC](https://forum.fritzing.org/t/zigbee-ebyte-library/20480/2 "2023-09-09T18:53:13Z")

</div>

There don’t appear to be fritzing parts available for any of them so parts would need to be made for them. This tutorial covers making Fritzing parts (although part making is fairly complex, you want enough parts that learning to make them would be best)

> [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692):
>
> Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are…

There are a couple of esp32 modules as Fritzing parts that you could use as a base for this.

Peter

---

_[View the full topic](https://forum.fritzing.org/t/zigbee-ebyte-library/20480)._