# Waveshare ESP32-C6-Zero module

**URL:** <https://forum.fritzing.org/t/waveshare-esp32-c6-zero-module/34020>\
**Category:** parts help\
**Created:** [April 20, 2026, 7:46pm UTC](https://forum.fritzing.org/t/waveshare-esp32-c6-zero-module/34020 "2026-04-20T19:46:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ReRuBabs](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/aca169/32.png) [@ReRuBabs](https://forum.fritzing.org/u/ReRuBabs)\
**Post date:** [April 20, 2026, 7:46pm UTC](https://forum.fritzing.org/t/waveshare-esp32-c6-zero-module/34020/1 "2026-04-20T19:46:02Z")

</div>

_I’m new to Fritzing, and might in the future spend more time on creating parts myself too. But for now I want to try the concept with a new project, using a Zigbee enabled ESP32 board I recently bought. I hope someone can help me out?  
I’m familiar with the Arduino IDE, but I like the graphical representation offered by Fritzing._

* * *

**ESP32-C6 Mini Development Board**

**Similar parts**  
These parts may be similar, but due to the LCD I can’t decide, and the other mini board pins are mirrored “left-right”.  
waveshare-esp32-c6-lcd-1-47/33301  
esp32-c6-super-mini-part/29431/16

**Top view​❗**  
[ESP32-C6-Zero-details-inter.zip](https://forum.fritzing.org/uploads/short-url/nBh03B4T96f0bchbEVfKcNAAYMT.zip) (698.8 KB)  
All images are zipped, as new members are limited in media uploads.

**Datasheet​❗**  
Only PDF’s I found are from the chip itself; I guess that’s not useful?

The official documentation of the part manufacturer is linked here:

> **[ESP32-C6-Zero - Waveshare Wiki](https://www.waveshare.com/wiki/ESP32-C6-Zero)**

**Footprint**  
N.A.

**Type**  
 I did not read this  
 Breakout board, sub assembly, plug in module (A)  
 Antenna (AE)  
 Battery (BT)  
 Capacitor (C)  
 Diode (D)  
 Display (DS)  
 Fuse (F)  
 Hardware , mounting screws, etc. (H)  
 Jack, fixed part of a connector pair, header (J)  
 Relay (K)  
 Inductor, Coil, Ferrite bead (L)  
 Loudspeaker, Buzzer (LS)  
 Motor (M)  
 Microphone (MK)  
 Plug, moveable part of a connector pair (P)  
 Transistor (Q)  
 Resistor (R)  
 Thermistor (RT)  
 Varistor (RV)  
 Switch (S)  
 Transformer (T)  
 Integrated Circuit (IC)  
 Crystal, Oscillator (Y)  
 Zender diode (Z)  
 Other (please specifiy)

---

<div class="post-metadata">

**Author:** ![MecaQC](https://forum.fritzing.org/user_avatar/forum.fritzing.org/mecaqc/32/27921_2.png) [@MecaQC](https://forum.fritzing.org/u/MecaQC)\
**Post date:** [July 7, 2026, 10:17pm UTC](https://forum.fritzing.org/t/waveshare-esp32-c6-zero-module/34020/2 "2026-07-07T22:17:02Z")

</div>

Hi,

I’m also looking for this part. Here is the official pinout from Waveshare:

> **[ESP32-C6-Zero - Waveshare Wiki](https://www.waveshare.com/wiki/ESP32-C6-Zero)**

The board has 2×13 pins (26 pins total), 3.3V, USB-C, and a built-in antenna.

Would anyone be able to create a Fritzing part (.fzpz) for this module?  
Part at [ESP32-C6-Zero Description | WaveShare Documentation Platform](https://docs.waveshare.com/ESP32-C6-Zero?variant=ESP32-C6-Zero)

Thank you!