# Vertical USB-C socket wanted **URL:** \ **Category:** parts help\ **Created:** [March 22, 2026, 11:39am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931 "2026-03-22T11:39:05Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![Ralf992](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/53a042/32.png) [@Ralf992](https://forum.fritzing.org/u/Ralf992)\ **Post date:** [March 22, 2026, 11:39am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/1 "2026-03-22T11:39:05Z")
Hello everyone, for my next PCB project I’m looking for a vertical USB-C receptacle. USB 2.0 is perfectly sufficient. In Fritzing and via Google search I can only find right-angle USB-C receptacles. Has anyone already made something like this and could make it available to me? Or even create a new part? In my opinion, the Molex type 217182-0001 would be very suitable. Here is the link to the component and the datasheet: [217182-0001 Molex | Mouser Deutschland](https://www.mouser.de/ProductDetail/Molex/217182-0001?qs=DRkmTr78QATos3F5kgk4kw%3D%3D) Thanks in advance, Ralf ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 23, 2026, 6:44am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/2 "2026-03-23T06:44:20Z")
Good morning, I’ll take a look to see whether there are KiCad files for that. Regards, Harald! ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 23, 2026, 10:41am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/3 "2026-03-23T10:41:20Z")
I downloaded the CAD data here and exported it to KiCad. I extracted the footprint and printed it to an SVG file. [https://www.mouser.de/ProductDetail/Molex/217182-0001?qs=DRkmTr78QATos3F5kgk4kw%3D%3D](https://www.mouser.de/ProductDetail/Molex/217182-0001?qs=DRkmTr78QATos3F5kgk4kw%3D%3D) But the dimensions do not match the datasheet. I must have done something wrong. Here is the footprint with the incorrect dimensions. ![footprint](https://forum.fritzing.org/uploads/default/original/3X/a/d/ad4f9d90e8e6444a72e8d861d1de225201bb6d9f.svg) Regards, Harald! ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 25, 2026, 7:53am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/4 "2026-03-25T07:53:40Z")
Hello @Ralf992, actually, you could use a different USB socket and change the footprint as well as the schematic symbol. I had already read out the footprint. Unfortunately, the dimensions look different from those in the datasheet. Do you have a way to verify the dimensions using the datasheet and an original part? I’ll try to find a mistake I may have made during the export. Best regards, Harald! ---
**Author:** ![Ralf992](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/53a042/32.png) [@Ralf992](https://forum.fritzing.org/u/Ralf992)\ **Post date:** [March 25, 2026, 9:33am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/5 "2026-03-25T09:33:31Z")
Hello Harald, thank you for your support. Where can I see what you have read out? Where can the dimensions be found? Is there a file? Can I import it into Fritzing? I would like to compare your dimensions with the original part. I am also happy to order the USB sockets. ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 25, 2026, 10:40am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/6 "2026-03-25T10:40:28Z")
Hello Ralf, the dimensions are in the datasheet. I’ll upload the dimensioning again here. You also want to create a PCB with the socket, so that the socket can be soldered onto the PCB afterwards. Because then the values have to be exactly right. Here are the dimensions from the datasheet: ![Datenblatt_Maße](https://forum.fritzing.org/uploads/default/original/3X/f/5/f5b092184a08379067d1c65d49e5262efa90b4ce.png) Important are the distances from center pad to center pad (0.5 mm) and the width of the pads, here 0.3 mm I have already made some progress with the footprint file, if you could measure the dimensions on an original socket we would be completely sure. Best regards, Harald! ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 25, 2026, 2:30pm UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/7 "2026-03-25T14:30:42Z")
Hello Ralf, it’s me again. After a brief search, I found at least three different USB-C footprints. Ours is the most complex of all. Perhaps it is important that you first decide on a version and then purchase it. For example, there is a USB variant with only 6 pins and GND. That one is certainly easier to work with. [USB 4140](https://www.mouser.com/catalog/specsheets/GCT_USB4140_Product_Drawing.pdf) However, it also has a different PCB layout. Regards, Harald! ---
**Author:** ![Ralf992](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/53a042/32.png) [@Ralf992](https://forum.fritzing.org/u/Ralf992)\ **Post date:** [March 25, 2026, 2:54pm UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/8 "2026-03-25T14:54:52Z")
Hello Harald, the suggested GCT socket is unsuitable, as it is only designed for power transfer / charging purposes. I need a socket with data transfer capability with at least USB 2.0. No socket has been purchased yet, we are happy to go with a different one. ---
**Author:** ![Ralf992](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/53a042/32.png) [@Ralf992](https://forum.fritzing.org/u/Ralf992)\ **Post date:** [March 25, 2026, 3:14pm UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/9 "2026-03-25T15:14:50Z")
Here are some links to USB-C sockets that would also work for my application. Perhaps they are better suited for Fritzing: [UJ20-C-V-G-SMT-P8-TR Same Sky | Mouser Germany](https://www.mouser.de/ProductDetail/Same-Sky/UJ20-C-V-G-SMT-P8-TR?qs=6avfeC6zeS7MGqzEbwXrig%3D%3D) [USB4960-00-C GCT | Mouser Germany](https://www.mouser.de/ProductDetail/GCT/USB4960-00-C?qs=vcFyY%252BOcAyi%252Btz7Oj%2F%252BmTQ%3D%3D) [UJ20-C-V-C-3-SMT-TR Same Sky | Mouser Germany](https://www.mouser.de/ProductDetail/Same-Sky/UJ20-C-V-C-3-SMT-TR?qs=i8QVZAFTkqSgRKhvytJi3g%3D%3D) ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 25, 2026, 6:44pm UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/10 "2026-03-25T18:44:21Z")
Hello, I have already prepared the USB4960-00-C. That one would be fine. The UJ20-C-V-C-3-SMT-TR has the advantage for you that it has PINs. If that doesn’t matter to you, we’ll stick with the USB4960-00-C. For reference, here is the datasheet again. [USB4960-00-C](https://www.mouser.de/datasheet/3/1507/1/usb4960.pdf) It has the same footprint as the variant you mentioned at the beginning. Can the breadboard symbol look rather minimalist? Best regards, Harald! ---
**Author:** ![Ralf992](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/53a042/32.png) [@Ralf992](https://forum.fritzing.org/u/Ralf992)\ **Post date:** [March 25, 2026, 8:59pm UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/11 "2026-03-25T20:59:21Z")
You’re right, the GCT USB4960-00-C is the same as the Molex one. I’m only comparing it in detail now. The footprint of the GCT USB4960-00-C or the Molex 217182-0001 would still be my favorite. The alternative models were only meant in case it makes things easier for you. I don’t use the breadboard function. So the symbols are not relevant to me. ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 26, 2026, 6:24am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/12 "2026-03-26T06:24:11Z")
> [@Ralf992](#): > > The footprint of the GCT USB4960-00-C or the Molex 217182-0001 would still be my favorite. Alright, then I’ll try to continue working on the part with this footprint. I think I can post something here by the weekend. Regards, Harald! ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 30, 2026, 5:53am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/13 "2026-03-30T05:53:39Z")
…it does take some time. I first need to deal with the holes for the mounting. I’ve never done that before…\n\nI’ll try it first for the Molex 217182-0001!\n\nBest regards, Harald! ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 30, 2026, 7:02am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/14 "2026-03-30T07:02:45Z")
Hello @RAPTOR7762, I am currently trying to create a footprint for a USB socket. I was able to import the footprint file, but some of the dimensions are not correct. They deviate by about 0.01 mm. Unfortunately, the mounting holes are also wrong. I have to redraw them. Can you please tell me if I am on the right track. I will then replace the mounting pads with the inserted oval and check the dimensions carefully. Draft Footprint: ![footprint_usb](https://forum.fritzing.org/uploads/default/original/3X/2/9/2999bfd1ad08ebabd0be41c93b00a9168c9601dd.svg) Dimensions: ![Datenblatt_Maße](https://forum.fritzing.org/uploads/default/original/3X/f/5/f5b092184a08379067d1c65d49e5262efa90b4ce.png) Many thanks and best regards, Harald! ---
**Author:** ![Ralf992](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/53a042/32.png) [@Ralf992](https://forum.fritzing.org/u/Ralf992)\ **Post date:** [March 30, 2026, 10:27am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/15 "2026-03-30T10:27:23Z")
The Molex 217182-0001 and the GCT with the same footprint have been ordered. A 0.01mm deviation doesn’t sound dramatic now… so no stress at work. ---
**Author:** ![Ralf992](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/r/53a042/32.png) [@Ralf992](https://forum.fritzing.org/u/Ralf992)\ **Post date:** [March 30, 2026, 6:19pm UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/16 "2026-03-30T18:19:13Z")
Good news. Mouser was quick and already delivered today. Instead of the planned GCT USB4960-00-C, I accidentally ordered the GCT USB4235-03-C. It differs slightly in footprint. Specifically, it only has one mechanical mounting on each side. Otherwise, it would also be fine for me. Maybe that simplifies things. Here’s the link: [USB4235](https://gct.co/files/drawings/usb4235.pdf). The Molex, which remains my favorite, arrived as planned. So I’m already ready for testing. ![IMG_6098](https://forum.fritzing.org/uploads/default/original/3X/9/9/998fa4513ebbf4a86a1fa6d487070dd6cbbec629.jpeg) ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 31, 2026, 7:02am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/17 "2026-03-31T07:02:56Z")
So little critters. I’ve now finished the first variant with the 6-point mounting true to scale. Since the pad dimensions stay the same, that’s not a problem. This is the version that is soldered at four points: ![Bildschirmfoto vom 2026-03-31 08-54-51](https://forum.fritzing.org/uploads/default/original/3X/3/7/37daf1feafe16adc78e5356573e159e782789613.png) ![Bildschirmfoto vom 2026-03-31 08-55-12](https://forum.fritzing.org/uploads/default/original/3X/7/b/7b452ac8592a5fe82e3e8494ce58ad5d3d9db3f7.png) Now I just need to adjust the SVG file so that Fritzing recognizes the holes and also passes them on for drilling. I’ve never done that before and it will take some time. Luckily the Easter eggs are already hidden, so I’ll give it a try this week. I’ll take a look at the second variant as well — the left connector only has two points for soldering, right? Regards, Harald! ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [March 31, 2026, 7:11am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/18 "2026-03-31T07:11:55Z")
> [@Ralf992](#): > > GCT USB4235-03-C It actually has different dimensions, but I can manage that too. First, I’ll solve the problem with the mounting holes. Regards, Harald! ---
**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\ **Post date:** [April 1, 2026, 7:35am UTC](https://forum.fritzing.org/t/vertikale-usb-c-buchse-gesucht/33931/19 "2026-04-01T07:35:00Z")
Good morning, I have now tested the old version first and “came a cropper” with it. The holes are not being drilled. I saw this with a Gerber file viewer. However, I do have a part where it works (see image). I want to examine this part and find out how Peter did it. I also asked the question in the forum, but everyone is very busy there. ![Bildschirmfoto vom 2026-04-01 09-30-20](https://forum.fritzing.org/uploads/default/original/3X/7/2/7296c607b6f7400279ea6bfcfc478a2b05d27723.png) The red dots are the drill holes, but they are missing on the lower USB connector. I’ll keep at it though… Regards, Harald!