# TP4056 Charger board **URL:** \ **Category:** parts help\ **Created:** [October 29, 2017, 12:18pm UTC](https://forum.fritzing.org/t/tp4056-charger-board/4795 "2017-10-29T12:18:50Z")\ **Posts on this page:** 1\ **Showing post:** 11
**Author:** ![Old\_Grey](https://forum.fritzing.org/user_avatar/forum.fritzing.org/old_grey/32/973_2.png) [@Old\_Grey](https://forum.fritzing.org/u/Old_Grey)\ **Post date:** [October 30, 2017, 12:58pm UTC](https://forum.fritzing.org/t/tp4056-charger-board/4795/11 "2017-10-30T12:58:56Z")
The correct way to remove a part is remove it from the bin inside FZ, otherwise you have to search and chase instance inside the file system. Yeah you didn’t follow the FZ layer rules for PCBs. Go watch my PCB video if this doesn’t make sense. You make a group called silkscreen and put all lines and text in it. Make a group below that called copper1(top copper), and in that make copper0(bottom copper), and in that put all contacts. With round contacts the OD is the size of the pad, and the ID is the size of the hole. If this part will be fitted to a custom PCB that you are making, make the header pins 3mm apart and just install individual pins in each hole. > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/6): > > Fritzing Part Creation - Chapter5 - PCB View Drawing for PCB view, and checking outputs. Note : The contact pad size used in this video is an example, use the applicable size for your application. 0:00 Overview 1:27 XML group format for PCB view 2:55 Correcting svg drawn with Adobe Illustrator 3:39 Unknown XML groups 3:51 SMD XML group format 4:20 Separate XML groups 4:22 Duplicated pads in both copper groups 4:49 Holes in PCB 5:31 Correct XML group format 5:52 Making an IC from sc… --- _[View the full topic](https://forum.fritzing.org/t/tp4056-charger-board/4795)._