# TB6550 V2 StepperMotor Driver Board **URL:** \ **Category:** parts submit\ **Created:** [January 27, 2022, 10:05am UTC](https://forum.fritzing.org/t/tb6550-v2-steppermotor-driver-board/15032 "2022-01-27T10:05:34Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [January 28, 2022, 4:01pm UTC](https://forum.fritzing.org/t/tb6550-v2-steppermotor-driver-board/15032/3 "2022-01-28T16:01:17Z")
There are a number of problems. Schematic is not on 0.1in boundaries ![capture](https://forum.fritzing.org/uploads/default/original/2X/d/dc328e50c572c3281bf649b471f214d429de7f3b.jpeg) you would be best (as you appear to be using Inkscape) to use the Fritzing schematic extension to create a correctly formatted schematic > [@Fritzing-Schematic an Inkscape extension - released](https://forum.fritzing.org/t/fritzing-schematic-an-inkscape-extension-released/13394): > > Hi all! I have been working on an extension for Inkscape to create rectangular schematic symbol .svg files for use in Fritzing. I think I created a useful tool to speed up creation of schematic symbols, and now I want to share it with the community. It’s available on github: [https://github.com/revolt-randy/Fritzing-Schematic-an-Inkscape-Extension.](https://github.com/revolt-randy/Fritzing-Schematic-an-Inkscape-Extension.) To install: In Inkscape, the edit menu → user preferences → system will have an option for ‘User extensions’ - allowing you to open the folder to… as well pcb is not correct, it currently shows a resistor when it should have an outline of the board. You appear to be missing layerIds (which will cause the part to not be exported as an image) among other problems. FritzingCheckPart.py reports the following problems: Error 69: File ‘svg.breadboard.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_breadboard.svg.bak’ At line 25 Found a drawing element before a layerId (or no layerId) Error 69: File ‘svg.schematic.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_schematic.svg.bak’ At line 17 Found a drawing element before a layerId (or no layerId) Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector2pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector3pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector4pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector5pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector6pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector7pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector8pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector9pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector10pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector11pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak Error 18: File ‘part.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_5.fzp.bak’ Connector connector12pin is in the fzp file but not the svg file. (typo?) svg svg.pcb.TB6560\_V2-DF\_5164bf756a9708edd577a149cb5d660e\_15\_pcb.svg.bak this tutorial set may also be of help. > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… Peter --- _[View the full topic](https://forum.fritzing.org/t/tb6550-v2-steppermotor-driver-board/15032)._