# STOCKO connector design

**URL:** <https://forum.fritzing.org/t/stocko-connector-design/11098>\
**Category:** parts help\
**Created:** [October 15, 2020, 4:37pm UTC](https://forum.fritzing.org/t/stocko-connector-design/11098 "2020-10-15T16:37:58Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![microMerlin](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/m/76d3ee/32.png) [@microMerlin](https://forum.fritzing.org/u/microMerlin)\
**Post date:** [October 15, 2020, 5:44pm UTC](https://forum.fritzing.org/t/stocko-connector-design/11098/2 "2020-10-15T17:44:26Z")

</div>

Images are not enough to create a part from.

[FAQ:Where can I find “specific part”](https://github.com/fritzing/fritzing-parts/wiki/FAQ:Where-can-I-find-%22specific-part%22) includes information of what is needed to create a part when one can not be found.

From the image, the Stocko connector looks like it is (ends with) a standard 90° single row header, so the header part in Fritzing should be functionally the same. With the limitation that no parts can be placed on one side of it on pcb.

---

_[View the full topic](https://forum.fritzing.org/t/stocko-connector-design/11098)._
