# SRPssives EC12E20-24P24C-SW Rotary Encoder **URL:** \ **Category:** parts submit\ **Created:** [October 2, 2022, 5:24pm UTC](https://forum.fritzing.org/t/srpssives-ec12e20-24p24c-sw-rotary-encoder/17067 "2022-10-02T17:24:57Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Aligator42](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/a/ee59a6/32.png) [@Aligator42](https://forum.fritzing.org/u/Aligator42)\ **Post date:** [October 2, 2022, 5:24pm UTC](https://forum.fritzing.org/t/srpssives-ec12e20-24p24c-sw-rotary-encoder/17067/1 "2022-10-02T17:24:57Z")
Part of SRPassives EC12E20-24P24C-SW Rotary encoder with push button. Technical datasheet is available here: [https://www.tme.eu/Document/3355ee49dae2859b0bf824db7ca698f7/EC12E20-24P24C-SW.pdf](https://www.tme.eu/Document/3355ee49dae2859b0bf824db7ca698f7/EC12E20-24P24C-SW.pdf) [Rotary Encoder Pushbutton.fzpz](https://forum.fritzing.org/uploads/short-url/oNh1V9ybvuejtI5FkLIDOqVP1P8.fzpz) (6.6 KB) ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [October 2, 2022, 6:24pm UTC](https://forum.fritzing.org/t/srpssives-ec12e20-24p24c-sw-rotary-encoder/17067/2 "2022-10-02T18:24:03Z")
Again schematic is incorrect in that it isn’t aligned to the 0.1in grid as it should be. ![capture](https://forum.fritzing.org/uploads/default/original/2X/7/7b3c6717a55664458f3873080af79ebed1f6b856.jpeg) The square holes in pcb also won’t be drilled. Peter ---
**Author:** ![Aligator42](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/a/ee59a6/32.png) [@Aligator42](https://forum.fritzing.org/u/Aligator42)\ **Post date:** [October 6, 2022, 5:45pm UTC](https://forum.fritzing.org/t/srpssives-ec12e20-24p24c-sw-rotary-encoder/17067/3 "2022-10-06T17:45:55Z")
There is now an overworked version: [Rotary Encoder Pushbutton.fzpz](https://forum.fritzing.org/uploads/short-url/4pO1lYqxBWNFXTswSRwIBbp5QQm.fzpz) (6.8 KB)