# SeeedStudio Relay Shield v3.0

**URL:** <https://forum.fritzing.org/t/seeedstudio-relay-shield-v3-0/4550>\
**Category:** parts submit\
**Created:** [September 24, 2017, 7:51pm UTC](https://forum.fritzing.org/t/seeedstudio-relay-shield-v3-0/4550 "2017-09-24T19:51:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JefferyS](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/7feea3/32.png) [@JefferyS](https://forum.fritzing.org/u/JefferyS)\
**Post date:** [September 24, 2017, 7:51pm UTC](https://forum.fritzing.org/t/seeedstudio-relay-shield-v3-0/4550/1 "2017-09-24T19:51:11Z")

</div>

I hope this is good, didn’t do a lot of testing and somewhere got confused in my SVG files and had to re do it.

On thing I just found out is that when making the part Fritzing changes stuff in the SVG files. So after I make a part now and have to go back to the SVG file to change/fix something I use the files Fritzing changed and things worked better.

Relay Shield v3.0  
[https://www.seeedstudio.com/Relay-Shield-v3.0-p-2440.html](https://www.seeedstudio.com/Relay-Shield-v3.0-p-2440.html)  
[SeeedStudio - Relay Shield v3.0.fzpz](https://forum.fritzing.org/uploads/default/original/2X/d/deb371e34bd50da3881113c79d99a9d324644a42.fzpz) (52.9 KB)

 ![](https://forum.fritzing.org/uploads/default/original/2X/6/6145e6ca945285899d199bc9275e318f2f657486.PNG)

 ![](https://forum.fritzing.org/uploads/default/original/2X/d/d3263193fa3cf9411bca1b04458f3def8582b660.jpg)

Let me know if there are any problems and I will gladly fix them.

Thanks,

Jeffery

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [September 26, 2017, 1:51am UTC](https://forum.fritzing.org/t/seeedstudio-relay-shield-v3-0/4550/2 "2017-09-26T01:51:26Z")

</div>

Much the same issues as the 2.1 version (except this one has a ground bus).  
Again some pins in schematic aren’t aligned on .1 boundaries. Otherwise looks very good.

Peter

---

<div class="post-metadata">

**Author:** ![JefferyS](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/7feea3/32.png) [@JefferyS](https://forum.fritzing.org/u/JefferyS)\
**Post date:** [September 26, 2017, 4:55am UTC](https://forum.fritzing.org/t/seeedstudio-relay-shield-v3-0/4550/3 "2017-09-26T04:55:21Z")

</div>

Thanks Peter, I’ll get those fixed.

Jeffery