# Schottky Barrier Diodes 1N5819 TH

**URL:** <https://forum.fritzing.org/t/schottky-barrier-diodes-1n5819-th/27023>\
**Category:** parts help\
**Created:** [February 5, 2025, 11:24am UTC](https://forum.fritzing.org/t/schottky-barrier-diodes-1n5819-th/27023 "2025-02-05T11:24:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zorono](https://forum.fritzing.org/user_avatar/forum.fritzing.org/zorono/32/22200_2.png) [@Zorono](https://forum.fritzing.org/u/Zorono)\
**Post date:** [February 5, 2025, 11:24am UTC](https://forum.fritzing.org/t/schottky-barrier-diodes-1n5819-th/27023/1 "2025-02-05T11:24:26Z")

</div>

**Name of the part**  
Schottky Barrier Diodes 1N5819 TH

**Top view**  
 ![image](https://forum.fritzing.org/uploads/default/original/3X/d/7/d751ba177d5db311d868aab3cbf555b64bc99394.png)

**Datasheet**

> **[1N5817-1N5819.pdf](https://www.diodes.com/assets/Datasheets/1N5817-1N5819.pdf)**
>
> 427.63 KB

**Type**  
 I did not read this  
 Breakout board, sub assembly, plug in module (A)  
 Antenna (AE)  
 Battery (BT)  
 Capacitor (C)  
 Diode (D)  
 Display (DS)  
 Fuse (F)  
 Hardware , mounting screws, etc. (H)  
 Jack, fixed part of a connector pair, header (J)  
 Relay (K)  
 Inductor, Coil, Ferrite bead (L)  
 Loudspeaker, Buzzer (LS)  
 Motor (M)  
 Microphone (MK)  
 Plug, moveable part of a connector pair (P)  
 Transistor (Q)  
 Resistor (R)  
 Thermistor (RT)  
 Varistor (RV)  
 Switch (S)  
 Transformer (T)  
 Integrated Circuit (IC)  
 Crystal, Oscillator (Y)  
 Zender diode (Z)  
 Other (please specifiy)

---

<div class="post-metadata">

**Author:** ![RAPTOR7762](https://forum.fritzing.org/user_avatar/forum.fritzing.org/raptor7762/32/22620_2.png) [@RAPTOR7762](https://forum.fritzing.org/u/RAPTOR7762)\
**Post date:** [February 5, 2025, 1:18pm UTC](https://forum.fritzing.org/t/schottky-barrier-diodes-1n5819-th/27023/2 "2025-02-05T13:18:48Z")

</div>

I believe the one in the core parts should do what you want

 ![image](https://forum.fritzing.org/uploads/default/original/3X/2/2/220536ca49ef6f36c7ec94023bb0d92b3b01327c.png)

Through hole type, as you requested

 ![image](https://forum.fritzing.org/uploads/default/original/3X/f/8/f82288db3c13766555c795a72a9a4c85b183ca06.png)  
 ![image](https://forum.fritzing.org/uploads/default/original/3X/0/b/0bdd54b5ba30fc6ada7af25b06cd4b655f16e37c.png)

You may change inspector fields accordingly

---

<div class="post-metadata">

**Author:** ![Zorono](https://forum.fritzing.org/user_avatar/forum.fritzing.org/zorono/32/22200_2.png) [@Zorono](https://forum.fritzing.org/u/Zorono)\
**Post date:** [February 5, 2025, 8:04pm UTC](https://forum.fritzing.org/t/schottky-barrier-diodes-1n5819-th/27023/3 "2025-02-05T20:04:28Z")

</div>

thanks bro for your help
