# Schematic view wont led me move red parts

**URL:** <https://forum.fritzing.org/t/schematic-view-wont-led-me-move-red-parts/23566>\
**Category:** parts help\
**Created:** [May 14, 2024, 2:13pm UTC](https://forum.fritzing.org/t/schematic-view-wont-led-me-move-red-parts/23566 "2024-05-14T14:13:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Xander\_DT](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/x/ce73a5/32.png) [@Xander\_DT](https://forum.fritzing.org/u/Xander_DT)\
**Post date:** [May 14, 2024, 2:13pm UTC](https://forum.fritzing.org/t/schematic-view-wont-led-me-move-red-parts/23566/1 "2024-05-14T14:13:47Z")

</div>

I have 2 different types of parts that i’m not able to move, they are also red.  
I can move all of the other parts around, just not these 3  
I tried clicking on the ‘?’ to see if it would tell me anything, but i dont see info pop up.  
 ![image](https://forum.fritzing.org/uploads/default/original/3X/d/b/db50bd309e93e74b7c37bef8b4f054efa2db29bc.png)

can someone help me?

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [May 14, 2024, 2:17pm UTC](https://forum.fritzing.org/t/schematic-view-wont-led-me-move-red-parts/23566/2 "2024-05-14T14:17:23Z")

</div>

The parts involved are broken. The red rectangle indicates the connectors in schematic are not defined. If you upload the part (the .fzpz file, upload is 7th icon from the left in the reply menu) I will have a look.

Peter

---

<div class="post-metadata">

**Author:** ![Xander\_DT](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/x/ce73a5/32.png) [@Xander\_DT](https://forum.fritzing.org/u/Xander_DT)\
**Post date:** [May 14, 2024, 2:24pm UTC](https://forum.fritzing.org/t/schematic-view-wont-led-me-move-red-parts/23566/3 "2024-05-14T14:24:14Z")

</div>

[SCHEMA\_FRITZING.fzz](https://forum.fritzing.org/uploads/short-url/iWBcdIXOB7UDgGt7hK6iSeKZBMS.fzz) (284.9 KB)  
This is the project, and these below are the broken parts:  
[step down.fzpz](https://forum.fritzing.org/uploads/short-url/379GXBhqXOv5fr1puAvO6rG4Fwn.fzpz) (1.3 MB)  
[Keyes Relay.fzpz](https://forum.fritzing.org/uploads/short-url/x2wpq7qKShxCccBwlq0nHWRY1j3.fzpz) (36.9 KB)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [May 14, 2024, 2:59pm UTC](https://forum.fritzing.org/t/schematic-view-wont-led-me-move-red-parts/23566/4 "2024-05-14T14:59:48Z")

</div>

The relay part is broken. Try replacing it with the one here

Keyes Relay-improved.fzpz

> [@Keyestudio Library](https://forum.fritzing.org/t/keyestudio-library/1221/11):
>
> Here are improved versions of several of your parts. i[Keyes Tilt Switch-improved.fzpz](https://forum.fritzing.org/uploads/short-url/nQDExHwvevSJ5tYIHz4eiikJlN7.fzpz) (17.7 KB) Added the breadboard layerId (the old part won’t export as an image) and added labels to the pins in schematic. Laser [Laser-improved.fzpz](https://forum.fritzing.org/uploads/short-url/bp2QlaBW0oLDBvOmihVyGydnkDx.fzpz) (7.1 KB) added the layerId in breadboard and replaced schematic entirely. Added silkscreen to pcb. Keyes Relay [Keyes Relay-imporved.fzpz](https://forum.fritzing.org/uploads/short-url/mxZbNDaboy9c43bF2SXeytOAbdY.fzpz) (26.4 KB) Same as above. Keysstudio CCS811 added layerId and terminalIds (so wires connect at the end of the pin rather…

As well your fzz export appears to be screwing up on one drive (which has caused a variety of problems lately!) You may want to try moving Fritzing off of Onedrive.

 ![capture](https://forum.fritzing.org/uploads/default/original/3X/2/f/2ff3494762abd47402e3303ed08bedd7fcf968f8.jpeg)

Peter