# Request to get SeeedStudio LoRa fritzing **URL:** \ **Category:** parts help\ **Created:** [February 4, 2023, 4:31pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134 "2023-02-04T16:31:58Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![jidaloong](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/54ee81/32.png) [@jidaloong](https://forum.fritzing.org/u/jidaloong)\ **Post date:** [February 4, 2023, 4:31pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/1 "2023-02-04T16:31:58Z")
Hello, recently I am using SeeedStudio Groove E5 LoRa module for my project, but I can’t find the frizting file of SeeedStudio Groove E5 LoRa module when I want to design circuit. Can someone upload the respective LoRa module? Reference: [Grove - Wio-E5 - Seeed Wiki](https://wiki.seeedstudio.com/Grove_LoRa_E5_New_Version/) ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [February 4, 2023, 7:59pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/2 "2023-02-04T19:59:35Z")
This part should do what you want. [seeed-wio-e5.fzpz](https://forum.fritzing.org/uploads/short-url/uWwKDqNrjrD1JXzJxmXY5rwajoR.fzpz) (10.7 KB) Peter ---
**Author:** ![jidaloong](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/j/54ee81/32.png) [@jidaloong](https://forum.fritzing.org/u/jidaloong)\ **Post date:** [February 5, 2023, 2:44am UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/3 "2023-02-05T02:44:50Z")
Thanks Peter for your file, you help me a lot! ---
**Author:** ![Lekylouch](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/l/e79b87/32.png) [@Lekylouch](https://forum.fritzing.org/u/Lekylouch)\ **Post date:** [November 26, 2025, 2:05pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/4 "2025-11-26T14:05:21Z")
Hello, I am currently working with a Grove Wio E5, a LoRa module from Seeed Studio. I would like to create a schematic illustration of the prototype, which is why I started looking for available models, but I couldn’t find it in the Seeed Studio libraries. That’s when I came across your discussion, where Mr. Peter provided a component model. By the way, thank you for sharing it. Unfortunately, when I try to import it into my Fritzing workspace, I always get error messages. Could you please help me resolve this problem? ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [November 26, 2025, 2:38pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/5 "2025-11-26T14:38:15Z")
If you post the error message I can probably tell you what is going wrong. It loads fine for me on Fritzing 1.0.6. Peter ---
**Author:** ![Lekylouch](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/l/e79b87/32.png) [@Lekylouch](https://forum.fritzing.org/u/Lekylouch)\ **Post date:** [November 26, 2025, 3:14pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/7 "2025-11-26T15:14:44Z")
![Image2](https://forum.fritzing.org/uploads/default/original/3X/c/0/c019c79d59f2e4c98e40c5139e6a36de839ccba7.png) Here is the error message I am receiving ---
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [November 26, 2025, 3:33pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/8 "2025-11-26T15:33:53Z")
What happens when you click OK? I suspect the part won’t have loaded (although it usually gives more information than this.) Do a search in the parts search bar for wio-e5 to see if there is already a part loaded. Here the part is not loaded so nothing is found. ![capture](https://forum.fritzing.org/uploads/default/original/3X/b/9/b9030a01e28e2bda43cd02cfda5e201a2be61444.jpeg) Here the part is loaded and thus won’t load again. ![image](https://forum.fritzing.org/uploads/default/original/3X/e/d/eda00d5e074579e9364a7880c1539664c9804eb8.png) Attempting to load the part again causes this: ![capture2](https://forum.fritzing.org/uploads/default/original/3X/b/d/bdc36ef2ababe15df990b390a5125b06051b68b8.jpeg) This error message tells you what is wrong and clicking OK gets your error message. ![capture3](https://forum.fritzing.org/uploads/default/original/3X/f/b/fbcbb3a87242198b5fbdab51e7568874f083faf6.jpeg) Dragging the part found in the original search in to a sketch should give you the part. If not delete the part from the mine parts bin by right clicking on it and selecting delete part, then shutdown Fritzing answering yes to the save parts and save parts bins prompts (you can answer no to the save sketch prompt) to really delete the part. You should then be able to reload the part successfully. Peter Peter ---
**Author:** ![Lekylouch](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/l/e79b87/32.png) [@Lekylouch](https://forum.fritzing.org/u/Lekylouch)\ **Post date:** [November 27, 2025, 12:05pm UTC](https://forum.fritzing.org/t/request-to-get-seeedstudio-lora-fritzing/18134/9 "2025-11-27T12:05:24Z")
Thank you very much, I didn’t check the seed section properly and I’m sorry about that.