# Request - IRF520 MosFET module

**URL:** <https://forum.fritzing.org/t/request-irf520-mosfet-module/5601>\
**Category:** parts help\
**Created:** [March 7, 2018, 6:23am UTC](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601 "2018-03-07T06:23:03Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![KingDarBoja](https://forum.fritzing.org/user_avatar/forum.fritzing.org/kingdarboja/32/3552_2.png) [@KingDarBoja](https://forum.fritzing.org/u/KingDarBoja)\
**Post date:** [March 11, 2018, 4:33am UTC](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601/21 "2018-03-11T04:33:09Z")

</div>

I noticed the screw terminals, but in order to make them fit the 0.1 grid, I should either rescale it (the screw group) which would make it smaller (and ugly) or move them away from each other. Not sure what I should choose.

About the schematic, I forgot it! 😊

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [March 11, 2018, 5:38am UTC](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601/22 "2018-03-11T05:38:13Z")

</div>

I’d probably move the screw terminals on to .1 boundaries, if the wires connect a bit off center in the connector, to me that’s better (as in visually less jarring) than the wires being at an angle, but that may only be me. Which to do (or leave it as is) is a personal preference. If the schematic layer id is the only thing you forget you are doing pretty good 🙂 . It took me many many months to make parts like this and you look to have picked it up in a couple of weeks.

Peter

---

<div class="post-metadata">

**Author:** ![KingDarBoja](https://forum.fritzing.org/user_avatar/forum.fritzing.org/kingdarboja/32/3552_2.png) [@KingDarBoja](https://forum.fritzing.org/u/KingDarBoja)\
**Post date:** [March 11, 2018, 11:36pm UTC](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601/23 "2018-03-11T23:36:59Z")

</div>

Final fix:

[IRF520\_mos\_module.fzbz](https://forum.fritzing.org/uploads/default/original/2X/9/93591a7c83056c4f0f93f88304e62b33a7bb8dc2.fzbz) (23.3 KB)

It should be perfect right now 😃

---

<div class="post-metadata">

**Author:** ![spassignat](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/dc4da7/32.png) [@spassignat](https://forum.fritzing.org/u/spassignat)\
**Post date:** [July 30, 2020, 6:07pm UTC](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601/24 "2020-07-30T18:07:39Z")

</div>

It would be great to draw the shape of the module on the PCB layer with the height of the MOSFET.

The GND connector on the PCB layer is not defined. Trying to edit the part with Fritzig doesn’t let me define it (I looked at the svg file but I can’t figure out what’s wrong)

---

<div class="post-metadata">

**Author:** ![Old\_Grey](https://forum.fritzing.org/user_avatar/forum.fritzing.org/old_grey/32/973_2.png) [@Old\_Grey](https://forum.fritzing.org/u/Old_Grey)\
**Post date:** [July 30, 2020, 11:21pm UTC](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601/25 "2020-07-30T23:21:33Z")

</div>

How to assign a pin is in chapter 1

> [@Fritzing PART CREATION Video Tutorial Series](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647):
>
> NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part …

---

<div class="post-metadata">

**Author:** ![spassignat](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/s/dc4da7/32.png) [@spassignat](https://forum.fritzing.org/u/spassignat)\
**Post date:** [July 31, 2020, 5:31am UTC](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601/26 "2020-07-31T05:31:36Z")

</div>

I figured out why I can’t assign the pin. There are 2 connectors named GND in the part and probably also several others bind on the same svg element.

I slightly rename all the connector to have unique names and now it work as usual.

[Previous page](https://forum.fritzing.org/t/request-irf520-mosfet-module/5601.md?page=1)
