# Re SparkFun Electromechanical (Speaker PCB mount)

**URL:** <https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585>\
**Category:** parts help\
**Created:** [October 12, 2026, 3:13pm UTC](https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585 "2026-10-12T15:13:29Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Techie\_hobby1](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/t/dc4da7/32.png) [@Techie\_hobby1](https://forum.fritzing.org/u/Techie_hobby1)\
**Post date:** [October 12, 2026, 3:13pm UTC](https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585/1 "2026-10-12T15:13:29Z")

</div>

_PCB Mount Speaker - already available on Fritzing but the terminals are switched(Red appears to be -ve and Black is +ve._

Is there a simple way for me to be able to switch this around so that Red = +ve and Black = -ve  
Also, the termination seems to be midway along the pole (not too much of a problem, but aesthetically could do with termination point being at the end.

**Type**  
 I did not read this  
 Breakout board, sub assembly, plug in module (A)  
 Antenna (AE)  
 Battery (BT)  
 Capacitor (C)  
 Diode (D)  
 Display (DS)  
 Fuse (F)  
 Hardware , mounting screws, etc. (H)  
 Jack, fixed part of a connector pair, header (J)  
 Relay (K)  
 Inductor, Coil, Ferrite bead (L)  
 Loudspeaker, Buzzer (LS)  
 Motor (M)  
 Microphone (MK)  
 Plug, moveable part of a connector pair (P)  
 Transistor (Q)  
 Resistor (R)  
 Thermistor (RT)  
 Varistor (RV)  
 Switch (S)  
 Transformer (T)  
 Integrated Circuit (IC)  
 Crystal, Oscillator (Y)  
 Zender diode (Z)  
 Other (please specifiy)

Many thanks in advanced

---

<div class="post-metadata">

**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\
**Post date:** [October 12, 2026, 4:28pm UTC](https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585/2 "2026-10-12T16:28:10Z")

</div>

Could you please send me a file with the corresponding speakers.

Which version of Fritzing do you have?

Regards, Harald!

---

<div class="post-metadata">

**Author:** ![Techie\_hobby1](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/t/dc4da7/32.png) [@Techie\_hobby1](https://forum.fritzing.org/u/Techie_hobby1)\
**Post date:** [October 12, 2026, 10:12pm UTC](https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585/3 "2026-10-12T22:12:26Z")

</div>

I am using the current version 1.0.8

The speaker that I am talking about is already part of Fritzing’s large parts inventory as follows:

 ![image](https://forum.fritzing.org/uploads/default/original/3X/1/a/1ac6e3fffc433539decba0f48ffbdb9a76a69af4.png)

---

<div class="post-metadata">

**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\
**Post date:** [October 13, 2026, 5:35am UTC](https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585/4 "2026-10-13T05:35:40Z")

</div>

Strangely enough, I have two of them. Let me take a look at it. I would then design a new part and fix it. The existing part can be difficult to change once installed. To do that, you would need to access the files in the part directory directly.

I don’t think I’ll get to it before Friday though — is that okay?

Best regards, Harald!

---

<div class="post-metadata">

**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\
**Post date:** [October 13, 2026, 12:17pm UTC](https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585/5 "2026-10-13T12:17:29Z")

</div>

I once worked on a variant. Take a look at it. If anything else needs to be changed, just let me know.

As long as you’re not satisfied yet, you shouldn’t save this version in the parts library.

Best regards, Harald!

[Lautsprecher\_klein.fzpz](https://forum.fritzing.org/uploads/short-url/n338Za5QisBWLUdhvc16eAsV3oO.fzpz) (9.9 KB)

---

<div class="post-metadata">

**Author:** ![Techie\_hobby1](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/t/dc4da7/32.png) [@Techie\_hobby1](https://forum.fritzing.org/u/Techie_hobby1)\
**Post date:** [October 13, 2026, 10:18pm UTC](https://forum.fritzing.org/t/re-sparkfun-electromechanical-speaker-pcb-mount/34585/6 "2026-10-13T22:18:06Z")

</div>

Second variant is perfect thank you