# Rasperry Pi and Jetson Nano Parts library

**URL:** <https://forum.fritzing.org/t/rasperry-pi-and-jetson-nano-parts-library/18318>\
**Category:** parts help\
**Created:** [February 18, 2023, 11:01pm UTC](https://forum.fritzing.org/t/rasperry-pi-and-jetson-nano-parts-library/18318 "2023-02-18T23:01:31Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [February 18, 2023, 11:09pm UTC](https://forum.fritzing.org/t/rasperry-pi-and-jetson-nano-parts-library/18318/2 "2023-02-18T23:09:01Z")

</div>

The PI4 is available here:

> [@Raspberry pi 4 model B](https://forum.fritzing.org/t/raspberry-pi-4-model-b/8622/26):
>
> OK, success at last I think. First the scaling issue, I indeed compared the cpu rectangle between Illustrator and Inkscape: Your Illustrator breadboard svg My Inkscape copy of the breadboard svg: doing the scale calculation (using the widths in px) 51.920/38.851 = 1.336387737767368 which works out that Illustrator is using 72DPI as the drawing unit. Thus to convert the Illustrator svg in Inkscape, start with the Illustrator svg: and make sure scale str…

and there is reputed to be a jetson nano in this project

> [@FZPZ for Jetson Nano?](https://forum.fritzing.org/t/fzpz-for-jetson-nano/13252):
>
> I’m getting into the nitty gritty of my first project and decided it’s time to use Fritzing. Does anyone have a Jetson Nano FZPZ…any help would be greatly appreciated slight_smile

You probably need to load the sketch (the .fzz file) and export the part from the parts bin. If that has problems post and I’ll have a look at it.

Peter

---

_[View the full topic](https://forum.fritzing.org/t/rasperry-pi-and-jetson-nano-parts-library/18318)._