# Program for mac -CNC

**URL:** <https://forum.fritzing.org/t/program-for-mac-cnc/18620>\
**Category:** Tutorials - Guides - How to's - & Experiences.\
**Created:** [March 19, 2023, 10:27pm UTC](https://forum.fritzing.org/t/program-for-mac-cnc/18620 "2023-03-19T22:27:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nuno\_Filipe\_Pereira](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/n/c89c15/32.png) [@Nuno\_Filipe\_Pereira](https://forum.fritzing.org/u/Nuno_Filipe_Pereira)\
**Post date:** [March 19, 2023, 10:27pm UTC](https://forum.fritzing.org/t/program-for-mac-cnc/18620/1 "2023-03-19T22:27:03Z")

</div>

Hello goodnight. What is the best program to use in cnc with fritzin? Which advise?

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [March 19, 2023, 11:59pm UTC](https://forum.fritzing.org/t/program-for-mac-cnc/18620/2 "2023-03-19T23:59:37Z")

</div>

Type cnc in the search bar to find previous posts in the forum on this subject would be a good start. As I recall there have been a few posts in the past on the subject.

Peter

---

<div class="post-metadata">

**Author:** ![Nuno\_Filipe\_Pereira](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/n/c89c15/32.png) [@Nuno\_Filipe\_Pereira](https://forum.fritzing.org/u/Nuno_Filipe_Pereira)\
**Post date:** [March 20, 2023, 10:07am UTC](https://forum.fritzing.org/t/program-for-mac-cnc/18620/3 "2023-03-20T10:07:12Z")

</div>

Good morning. Yes before and make the post, I researched. None of them talks about software experiences to work pcb on cnc. I think that’s what this software lacks to be complete.