# Positioning the Arduino headers on a PCB board

**URL:** <https://forum.fritzing.org/t/positioning-the-arduino-headers-on-a-pcb-board/6706>\
**Category:** beginners\
**Created:** [February 28, 2019, 5:14pm UTC](https://forum.fritzing.org/t/positioning-the-arduino-headers-on-a-pcb-board/6706 "2019-02-28T17:14:00Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [February 28, 2019, 7:02pm UTC](https://forum.fritzing.org/t/positioning-the-arduino-headers-on-a-pcb-board/6706/6 "2019-02-28T19:02:22Z")

</div>

Ah! my mistake then, I figured you already had edited a part (which is what you will need to do to make a shield part). Your life just got a lot more complicated because you are descending in to parts creation hell 🙂 . It is poorly documented and complex, but several of us are happy to help. Which Arduino are you targeting, because we already have shield templates for some of them? In fact if you type shield in to the parts search (the magnifying glass on the parts bin in the right hand window) they will all come up (along with a lot of non relevant parts because search is more than a bit odd 🙂 ). There are templates for the uno and mega there and maybe others. The icons with pcb traces are usually the shield templates. Here are a couple of tutorials (that apply to the current fritzing version which most do not) on parts making. You probably want Old\_grey’s video series, it is more complete and more recently updated them mine.

> [@A new part creation HowTo (long! So long it is in 2 posts)](http://forum.fritzing.org/t/a-new-part-creation-howto-long-so-long-it-is-in-2-posts/2238):
>
> (Edit: November 2016: This is an updated (and corrected) version of the original parts creation howto. This version corrects some suggestions (mostly saving Inkscape files as optimized svg which turns out to cause other problems) with the first version and expands the section on parts testing. While there doesn’t appear to be a lot of interest in this subject I’ll make at least this update so the information is as correct as I can get it.) This is a description of how I made the Valor PM6078-00…

> [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/3):
>
> Fritzing Part Creation - Chapter3 - Inkscape Advanced Essentials Learning how to draw in Inkscape - more features. 0:00 Overview 0:16 Select object with cursor and XML Editor 3:34 Manipulate special PDF’s in Inkscape 4:33 XML Editor - Direct drawing manipulation 6:05 XML Editor - Making group, moving object, changing layer height 7:27 Cursor - Changing layer height 8:21 Ruler 9:07 Grids 9:28 Snap selection 10:16 Drawing origin

Peter

---

_[View the full topic](https://forum.fritzing.org/t/positioning-the-arduino-headers-on-a-pcb-board/6706)._
