# Plss make ltc3108

**URL:** <https://forum.fritzing.org/t/plss-make-ltc3108/34603>\
**Category:** parts help\
**Created:** [October 16, 2026, 3:01am UTC](https://forum.fritzing.org/t/plss-make-ltc3108/34603 "2026-10-16T03:01:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Adli\_Darvesh\_Sandire](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@Adli\_Darvesh\_Sandire](https://forum.fritzing.org/u/Adli_Darvesh_Sandire)\
**Post date:** [October 16, 2026, 3:01am UTC](https://forum.fritzing.org/t/plss-make-ltc3108/34603/1 "2026-10-16T03:01:49Z")

</div>

**Name of the part​❗**

LTC3108 Ultralow Voltage Step-Up Converter and Power Manager (IC)

**Your previous work, similar parts**

I searched the Fritzing parts library and forum but could not find a dedicated Fritzing part for the LTC3108 IC.

**Top view​❗**

Please refer to the top-view package drawing in the official LTC3108 datasheet. I will attach a top-view image of the IC package with the pin configuration clearly visible.

**Datasheet​❗**

Official datasheet by Analog Devices:  
[https://www.analog.com/media/en/technical-documentation/data-sheets/LTC3108.pdf](https://www.analog.com/media/en/technical-documentation/data-sheets/LTC3108.pdf)

**Footprint**

The LTC3108 is available in two package options:

- 12-lead DFN, 4 mm × 3 mm, with exposed thermal pad.

- 16-lead narrow SSOP.

A separate Fritzing part may be needed for each package variant.

**Type**

[] I did not read this  
[] Breakout board, sub assembly, plug in module (A)  
[] Antenna (AE)  
[] Battery (BT)  
[] Capacitor (C)  
[] Diode (D)  
[] Display (DS)  
[] Fuse (F)  
[] Hardware (H)  
[] Jack (J)  
[] Relay (K)  
[] Inductor (L)  
[] Loudspeaker (LS)  
[] Motor (M)  
[] Microphone (MK)  
[] Plug (P)  
[] Transistor (Q)  
[] Resistor (R)  
[] Thermistor (RT)  
[] Varistor (RV)  
[] Switch (S)  
[] Transformer (T)  
[yes] Integrated Circuit (IC)  
[] Other

 ![Screenshot 2026-10-16 094659](https://forum.fritzing.org/uploads/default/original/3X/e/c/ec47f7694ef58b937eeb2af068b9df117ff6bb37.png)

---

<div class="post-metadata">

**Author:** ![Harald\_Rau](https://forum.fritzing.org/user_avatar/forum.fritzing.org/harald_rau/32/21072_2.png) [@Harald\_Rau](https://forum.fritzing.org/u/Harald_Rau)\
**Post date:** [October 16, 2026, 7:48am UTC](https://forum.fritzing.org/t/plss-make-ltc3108/34603/2 "2026-10-16T07:48:26Z")

</div>

> [@Adli\_Darvesh\_Sandire](#):
>
> - 12-pin DFN

Is there an SVG file with exact dimensions for this, or better yet, a footprint?

I have a part here that could be used to build the desired component. You can find it in Fritzing under “max98306”

 ![Screenshot from 2026-10-16 09-50-18](https://forum.fritzing.org/uploads/default/original/3X/7/b/7bfbc10441504cd128a8bf449453ea8d5422505b.png)

Best regards, Harald!