# PART REQUEST - ESP32-S3-WROOM-1 Module

**URL:** <https://forum.fritzing.org/t/part-request-esp32-s3-wroom-1-module/26474>\
**Category:** parts help\
**Created:** [January 8, 2025, 2:01pm UTC](https://forum.fritzing.org/t/part-request-esp32-s3-wroom-1-module/26474 "2025-01-08T14:01:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [January 9, 2025, 1:37am UTC](https://forum.fritzing.org/t/part-request-esp32-s3-wroom-1-module/26474/2 "2025-01-09T01:37:59Z")

</div>

This part should do what you want. Note the vias are only in silkscreen (as it is too much trouble to include them in a SMD part) so you need to follow the procedure in

> [@Can´t find chip ESP32-WROOM and ESP32-WROVER](https://forum.fritzing.org/t/can-t-find-chip-esp32-wroom-and-esp32-wrover/8458/5):
>
> [Screenshot 2022-06-13 233137]

referenced above to add the necessary vias in your sketch…

I needed to set the grid size to 0.01in to align the pins (the bottom pins are on an odd offset)

[ESP32-S3-WROOM-1.fzpz](https://forum.fritzing.org/uploads/short-url/zPM6irC9C1Wv1gEEDihkv4X8qq9.fzpz) (10.2 KB)

Peter

---

_[View the full topic](https://forum.fritzing.org/t/part-request-esp32-s3-wroom-1-module/26474)._