# Part Request - AQV258 PhotoMOS Solid State Relay **URL:** \ **Category:** parts help\ **Created:** [January 9, 2025, 5:53am UTC](https://forum.fritzing.org/t/part-request-aqv258-photomos-solid-state-relay/26499 "2025-01-09T05:53:12Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [January 10, 2025, 3:29am UTC](https://forum.fritzing.org/t/part-request-aqv258-photomos-solid-state-relay/26499/4 "2025-01-10T03:29:37Z")
You would need to make a custom part to get the schematic. This tutorial will tell you how to do that, but it is fairly complex (the generic IC is much easier if less complete …) These days I usually use Randy’s Inkscape schematic extension to make schematics, but it doesn’t work for this type of schematic so you have to make that in Inkscape for yourself (which is quite complex.) > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… Peter --- _[View the full topic](https://forum.fritzing.org/t/part-request-aqv258-photomos-solid-state-relay/26499)._