# Part Edit crashes **URL:** \ **Category:** bugs\ **Created:** [October 27, 2023, 9:51am UTC](https://forum.fritzing.org/t/part-edit-crashes/20994 "2023-10-27T09:51:40Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [October 28, 2023, 2:45pm UTC](https://forum.fritzing.org/t/part-edit-crashes/20994/5 "2023-10-28T14:45:52Z")
Yep, appears to be a bug as it happens to me as well. These tutorials on parts creation may help: > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… I lately learned there aren’t links to the videos in Old\_Grey’s tutorial so you need to do a google search for the title and then they come up on YouTube. As noted mine doesn’t use parts editor, but in general parts creation is difficult and if you only need a part or two not really worth learning. For small numbers of parts you are better off to let one of us who is familiar with part creation make it for you by posting a request and a datasheet (with dimension and connection information for the part.) Peter --- _[View the full topic](https://forum.fritzing.org/t/part-edit-crashes/20994)._