# Part-creation-howto-part-3-fzp-file **URL:** \ **Category:** Tutorials - Guides - How to's - & Experiences.\ **Created:** [November 13, 2019, 4:36am UTC](https://forum.fritzing.org/t/part-creation-howto-part-3-fzp-file/7695 "2019-11-13T04:36:00Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [June 25, 2021, 4:39pm UTC](https://forum.fritzing.org/t/part-creation-howto-part-3-fzp-file/7695/4 "2021-06-25T16:39:59Z")
You are correct, A0-A5 are backwards in the part. I have replaced the original part in this post > [@Tarjeta S4A EDU, pieza en proceso solamente falta la imagen en PCB y en esquematico](https://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487/2): > > OK, I have fixed up your part (that involved an almost complete rewrite however). There are still several issues though. First your original breadboard svg is scaled wrong (the connectors are not on .1in boundaries), in the end rather than trying to deal with it I grabbed an image of the board from [https://www.gotronic.fr/pj2-34440-1407.pdf](https://www.gotronic.fr/pj2-34440-1407.pdf) and used that to place the pads. This means the pad placement is almost certainly inaccurate in pcb view. So as I assume you have one of these boards (whic… with a corrected one. I probably won’t change the howtos as it is a lot of work … You will need to delete the current part before you will be able to load the new part. Peter via google translate: Tienes razón, A0-A5 están al revés en la parte. He reemplazado la parte original en esta publicación. con uno corregido. Probablemente no cambiaré los howtos, ya que requiere mucho trabajo … Deberá eliminar la parte actual antes de poder cargar la nueva parte. --- _[View the full topic](https://forum.fritzing.org/t/part-creation-howto-part-3-fzp-file/7695)._