# P9813-based LED Driver request

**URL:** <https://forum.fritzing.org/t/p9813-based-led-driver-request/22965>\
**Category:** parts help\
**Created:** [March 29, 2024, 1:08pm UTC](https://forum.fritzing.org/t/p9813-based-led-driver-request/22965 "2024-03-29T13:08:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![yobniares](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/y/d9b06d/32.png) [@yobniares](https://forum.fritzing.org/u/yobniares)\
**Post date:** [March 29, 2024, 1:08pm UTC](https://forum.fritzing.org/t/p9813-based-led-driver-request/22965/1 "2024-03-29T13:08:40Z")

</div>

**Name of the part**  
Full Color RGB LED Strip Driver Module Shield P9813

**Top view**

 ![top view](https://forum.fritzing.org/uploads/default/original/3X/3/9/3941d08d214d9b18728a948ad65a35bf57d0491d.jpeg)

**Datasheet**  
The official documentation of the part manufacture is linked here:

> **[Full Color RGB LED Strip Driver Module Shield for Arduino STM32 AVR V1.0](https://www.diymore.cc/products/full-color-rgb-led-strip-driver-module-shield-for-arduino-stm32-avr-v1-0)**
>
> Overview:
> 
> Based on a P9813; Can be cascaded all lights of the drive module
> Just two signal lines and two power cords can control five meters long full-color (RGB) light bar
> Can also be cascaded more drive modules to control more light bar
> Just set...

> **[P9813\_datasheet.pdf](https://seeeddoc.github.io/Grove-LED_Strip_Driver/res/P9813_datasheet.pdf)**
>
> 704.39 KB

**Type**  
 I did not read this  
 Breakout board, sub assembly, plug in module (A)  
 Antenna (AE)  
 Battery (BT)  
 Capacitor (C)  
 Diode (D)  
 Display (DS)  
 Fuse (F)  
 Hardware , mounting screws, etc. (H)  
 Jack, fixed part of a connector pair, header (J)  
 Relay (K)  
 Inductor, Coil, Ferrite bead (L)  
 Loudspeaker, Buzzer (LS)  
 Motor (M)  
 Microphone (MK)  
 Plug, moveable part of a connector pair (P)  
 Transistor (Q)  
 Resistor (R)  
 Thermistor (RT)  
 Varistor (RV)  
 Switch (S)  
 Transformer (T)  
 Integrated Circuit (IC)  
 Crystal, Oscillator (Y)  
 Zender diode (Z)  
 Other (please specifiy)

---

<div class="post-metadata">

**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\
**Post date:** [March 29, 2024, 6:15pm UTC](https://forum.fritzing.org/t/p9813-based-led-driver-request/22965/2 "2024-03-29T18:15:45Z")

</div>

This part should do what you want. Note pcb view is suppressed as not useful.  
[RGB-LED-Strip-Driver-Module.fzpz](https://forum.fritzing.org/uploads/short-url/7hBjSiQrt6N8DsyO6RZxIoknr8z.fzpz) (14.6 KB)

Peter

---

<div class="post-metadata">

**Author:** ![yobniares](https://forum.fritzing.org/letter_avatar_proxy/v4/letter/y/d9b06d/32.png) [@yobniares](https://forum.fritzing.org/u/yobniares)\
**Post date:** [April 2, 2024, 8:39pm UTC](https://forum.fritzing.org/t/p9813-based-led-driver-request/22965/3 "2024-04-02T20:39:33Z")

</div>

That’s what I’ve looked for, thank you so much!