# OCRA font not accepted **URL:** \ **Category:** beginners\ **Created:** [January 29, 2022, 4:28pm UTC](https://forum.fritzing.org/t/ocra-font-not-accepted/15052 "2022-01-29T16:28:45Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [January 29, 2022, 8:57pm UTC](https://forum.fritzing.org/t/ocra-font-not-accepted/15052/6 "2022-01-29T20:57:03Z")
There are dual font family definitions in this one: ![capture](https://forum.fritzing.org/uploads/default/original/2X/b/b2a1f78017a8cb3cd2fdbcef95b5df97d54f6f04.jpeg) This is the svg displayed in Inkscape (you may want to consider changing to Inkscape, it is somewhat more Fritizing friendly.) Fritizing is likely complaining about the , monospace in the font family but I expect it will still work correctly using the OCRA font (although I don’t know for sure!) As well you have no connectors defined and lack a groupId. It is desirable the svg looks like this ![capture1](https://forum.fritzing.org/uploads/default/original/2X/e/edb01d455f18c9d4cea357cc8d090becd69fb9a6.jpeg) These tutorials (which apply to the current version of Fritzing) may also be helpful. > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… Peter --- _[View the full topic](https://forum.fritzing.org/t/ocra-font-not-accepted/15052)._