# NUCLEO Card H755ZI-Q **URL:** \ **Category:** parts submit\ **Created:** [July 25, 2021, 3:20pm UTC](https://forum.fritzing.org/t/nucleo-card-h755zi-q/13500 "2021-07-25T15:20:52Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![vanepp](https://forum.fritzing.org/user_avatar/forum.fritzing.org/vanepp/32/4426_2.png) [@vanepp](https://forum.fritzing.org/u/vanepp)\ **Post date:** [July 25, 2021, 6:03pm UTC](https://forum.fritzing.org/t/nucleo-card-h755zi-q/13500/2 "2021-07-25T18:03:00Z")
At a quick look this doesn’t appear to be a part. It lacks all connectors in breadboard and most of them in schematic. PCB looks to be perhaps an Arduino mega but doesn’t match the pictures of the NUCLEO H755ZI-Q. This set of tutorials may help you fix up the part by copying in header connector parts to get the correct connectors. > [@Part creation howto part 1 breadboard and pcb](https://forum.fritzing.org/t/part-creation-howto-part-1-breadboard-and-pcb/7692): > > Someone in this forum post requested help to fix up a part. So while doing that I decided to record what I needed to do in order to fix the part to provide a tutorial to create new / fix broken parts. If you start from the Tarjeta S4A EDU.fzpz file posted in the above thread, you should be able to recreate my improved part posted in the same thread. I started by loading the original part in to Fritzing, that indicates breadboard is (at first look anyway) pretty good, but schematic and pcb are… this video series also applies to the current Fritzing version (most others are for older versions and may no longer be entirely correct.) > [@Fritzing PART CREATION Video Tutorial Series](http://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647): > > NEW FASTER PART MAKING VIDEOS AT THE BOTTOM-[Fritzing Parts Fast](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/19) ADVANCED FRITZING USER TIPS & TRICKS VIDEOS AT THE BOTTOM-[Fritzing Adv Tips & Tricks](https://forum.fritzing.org/t/fritzing-part-creation-video-tutorial-series/2647/15) A series of part creation videos - I’m not an expert, but there was nothing else around at the time. Use 1080p HD fullscreen to see details clearly - use gear symbol bottom right -. Recorded slowly for older people, so select a higher speed if it’s too slow. P.S. - Sorry about the voice/sound yum Fritzing Part Creation - Chapter1 - New Part … Peter --- _[View the full topic](https://forum.fritzing.org/t/nucleo-card-h755zi-q/13500)._